Page 16 / 63
Scroll up to view Page 11 - 15
Manual Ver1.0
- 16 -
Quick Setup - Device Setup
This page is where you can configure the modem’s IP address and Default DHCP
Figure 13. Quick Setup – Device Setup – LAN and DHCP Server
Quick Setup - Summary
Figure 14. Quick Setup – WAN Setup – Summary
The last page displays a summary of your settings. You must click on the “Save” button to complete
the configuration.
Page 17 / 63
Manual Ver1.0
- 17 -
4.4 - IP over ATM (IPoA) Configuration
Click on “Quick Setup” in the left frame and follow the steps below to create an IPoA
connection.
Here you can either select DSL Autoconnect (Modem will attempt to find the correct
VPI/VCI settings) or Uncheck the box to manually input the VPI/VCI settings.
Figure 15. Quick Setup – ATM PVC
Quick Setup – Connection Type
This page is where you select IPoA (IP over ATM).
Figure 16. Quick Setup – Connection Type
Page 18 / 63
Manual Ver1.0
- 18 -
Quick Setup – WAN IP Settings
This page is where you input the IP information provided by your ISP. This
connection does not support DHCP (Where modem obtains IP information
automatically)
Figure 17. Quick Setup – WAN IP Settings
Quick Setup – Network Address Translation and IGMP
This page is where you either select to enable NAT (Please enable this option for the
M404/M405 to route private (Local) IP address to your LAN clients).
Page 19 / 63
Manual Ver1.0
- 19 -
Figure 18. Quick Setup – Network Address Translation and IGMP
Quick Setup - Device Setup
This page is where you can configure the modem’s IP address and Default DHCP
Figure 19. Quick Setup – Device Setup – LAN and DHCP Server
Quick Setup – Summary
Figure 20. Quick Setup – WAN Setup – Summary
Page 20 / 63
Manual Ver1.0
- 20 -
The last page displays a summary of your settings. Click on the “Save” button to complete the
configuration.
4.5 - Bridging (Transparent/Pass-through) Configuration
Click on “Quick Setup” in the left frame and follow the steps below to create a Bridge
connection.
Here you can either select DSL Autoconnect (Modem will attempt to find the correct
VPI/VCI settings) or Uncheck the box to manually input the VPI/VCI settings.
Figure 21. Quick Setup – ATM PVC Configuration
Quick Setup – Connection Type
This page is where you select Bridging (Last option).
19216811.live