Verizon FiOS-G1100 Router Manual PDF (Setup & Configuration Guide)

Page 101 / 208 Scroll up to view Page 96 - 100

3.

Enter the service name then conﬁgure its inbound and

outbound trigger ports. Click

Apply

to save User Deﬁned

changes. The Port Triggering page displays.

4.

Click

Apply

again to save all changes.

6.4/

REMOTE ADMINISTRATION

Caution:

Enabling Remote Administration places your Gateway network at risk

from outside attacks.

You can access and control your Gateway not only from within the local

network, but also from the Internet using Remote Administration.

100

SECURITY SETTINGS

06

/ CONFIGURING

verizon.com/ﬁos

|

©

Page 102 / 208

REMOTE ADMINISTRATION

AND STATIC NAT

You can allow incoming access to the following:

•

Web Management

- used to obtain access to your Gateway’s GUI

and gain access to all settings and parameters through a web

browser.

•

Diagnostic Tools

- used for troubleshooting and remote system

management by a user or Verizon.

Web Management remote administration access may be used to

modify or disable ﬁrewall settings. Local IP addresses and other

settings can also be changed, making it difﬁcult or impossible to access

your Gateway from the local network. Remote administration access

to SSH or Web Management services should be activated only when

absolutely necessary.

Note:

Encrypted remote administration is performed using a secure SSL

connection and requires a SSL certiﬁcate. When accessing your Gateway for

the ﬁrst time using encrypted remote administration, a warning page opens

with a certiﬁcate authentication message displayed. This is due to your

Gateway SSL certiﬁcate being self-generated. When this message display

under that circumstance, ignore the message and continue. Even though this

message displays, the self-generated certiﬁcate is safe and provides a secure

SSL connection.

To enable remote administration:

1.

Select

Remote Administration

.

Page 103 / 208

2.

To enable access, select the check box.

3.

Click

Apply

to save changes.

4.

To remove access, clear the check box.

5.

Click

Apply

again to save changes.

6.5/

STATIC NAT

Static NAT allows devices located behind a ﬁrewall that is conﬁgured

with private IP addresses to appear to have public IP addresses to the

Internet. This allows an internal host, such as a web server, to have

an unregistered (private) IP address and still be accessible over the

Internet.

102

SECURITY SETTINGS

06

/ CONFIGURING

verizon.com/ﬁos

|

©

Page 104 / 208

STATIC NAT AND

SECURITY LOG

To conﬁgure static NAT:

1.

Select

Static NAT

.

2.

To create a static NAT, click

Add

. The Add NAT/NAPT Rule

page displays.

Page 105 / 208

3.

Select a source address in the

Specify Address

ﬁeld or enter

an IP address in the text box.

4.

Enter the public IP address.

5.

If using port forwarding, select the

Enable Port Forwarding

for Static NAT

check box.

6.

Click

Apply

to save changes.

7.

Repeat these steps to add additional static IP addresses.

6.6/

SECURITY LOG

You can view events that your ﬁrewall has blocked by accessing

the security log. Your Gateway reports events, such as attempts to

establish inbound and outbound connections, attempts to authenticate

at an administrative interface, such as your Gateway GUI, ﬁrewall

conﬁguration, and system start-up.

The security log reports the following information:

•

Time

- based on the date and time in your Gateway

•

Event

- consists of ﬁrewall information, ﬁrewall setup, and system

log

•

Event Type

- describes the event that occurred, such as a

fragmented packet or parental controls.

•

Details

- provide a reason the event occurred, such as a packet has

been blocked because of parental controls.

104

SECURITY SETTINGS

06

/ CONFIGURING

verizon.com/ﬁos

|

©

Rate

Popular Verizon Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share