Page 46 / 208
Scroll up to view Page 41 - 45
ADVANCED
SECURITY SETTINGS
2.
In the
WEP Keys
section, activate the encryption key by
entering the key name in the
Encryption Key
column. If HEX,
the key must be hexadecimal digits. If ASCII, any characters
can be used.
3.
Specify the length of key 1 by selecting 64/40 bit or
128/104 bit in the
Key Length
field and HEX or ASCII in the
Entry Method
field.
4.
Click
Apply
to save changes.
WPA/WPA2 Mixed Mode
If WPA/WPA2 Mixed Mode (Wi-Fi Protected Access) was selected, the
WPA Key page displays. Selecting WPA/WPA2 Mixed Mode allows the
security mode to be automatically set by the gateway based on the
security capabilities of the client device. WPA/WPA2 mixed mode is
the default wireless security protocol.
To set the WPA/WPA2 Mixed Mode security:
1.
Enter the Pre-Shared Key as a wireless password.
2.
To activate the group key update interval, select the
Group
Key Update Interval
check box and set the interval time in
seconds.
Page 47 / 208
46
SETTINGS
03
/ WIRELESS
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
3.
Click
Apply
to save the changes.
WPA2
If WPA2 (Wi-Fi Protected Access II) was selected, the WPA2 page
displays.
To set the WPA2 security:
1.
Enter the Pre-Shared Key.
2.
To activate the group key update interval, select the
Group
Key Update Interval
check box and set the interval time in
seconds.
3.
Click
Apply
to save the changes.
3.3b/
LEVEL 2: SSID BROADCAST
You can configure your Gateway’s SSID broadcast capabilities to allow
or disallow wireless devices from automatically using a broadcast SSID
name to detect your Gateway wireless network.
Page 48 / 208
ADVANCED
SECURITY SETTINGS
To enable or disable SSID broadcast:
1.
In the Advanced Settings page, locate the
Level 2
section.
2.
Click the
2.4 GHz SSID Broadcast
or
5 GHz SSID Broadcast
link for the wireless network you wish to modify.
The
following example uses the 2.4 GHz network. The display
configuration looks basically the same for the 5 GHz
network.
3.
To enable SSID broadcasting, click the
Enable
radio button.
SSID broadcast is enabled by default. The SSID of the
wireless network will be broadcast to all wireless devices.
Page 49 / 208
48
SETTINGS
03
/ WIRELESS
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
4.
To disable SSID broadcasting, click the
Disable
radio button.
The public SSID broadcast will be hidden from all wireless
devices. You will need to manually configure additional
wireless devices to join the wireless network.
5.
Click
Apply
to save the changes.
3.3c/
LEVEL 3: LIMIT ACCESS
You can configure your Gateway to limit access to your wireless
network allowing access only to those devices with specific MAC
addresses or based on the type of wireless technology used.
To limit access:
1.
In the Advanced Settings page, locate the
Level 3
section.
2.
To allow only devices with specific MAC addresses, click
the
Wireless MAC Authentication
link. The Wireless MAC
Authentication page displays. For additional details, refer to
the
Wireless MAC Authentication
section.
3.
To limit access based on the type of technology, click the
802.11 b/g/n/ac Mode
link. The 802.11 b/g/n/ac Mode page
displays. For additional details, refer to the
802.11 b/g/n/ac
Mode
section.
Page 50 / 208
WIRELESS MAC
AUTHENTICATION
4.
To access other advanced wireless options, click the
Other
Advanced Wireless Options
link. The Other Advanced
Wireless Options page displays. For additional details, refer
to the
Other Advanced Wireless Options
section.
3.4/
WIRELESS MAC AUTHENTICATION
You can allow or deny access to your wireless network by specifying
devices with specific MAC addresses.
To set wireless MAC authentication:
1.
On the Advanced Settings page, locate the
Level 3
section
and click the
Wireless MAC Authentication
link. The Wireless
MAC Authentication page displays.
19216811.live