Page 41 / 119 Scroll up to view Page 36 - 40
Ubee Interactive
Using the Backup Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
37
The location for the backed up file appears to the right of the Browse button. Click the
Restore
button.
You are advised that you will be required to reboot the modem. Click ‘
OK
’.
You are then notified that the device has been reset. Click ‘
RELOAD
’.
Page 42 / 119
Ubee Interactive
Using the Backup Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
38
You are then presented with the login screen for the modem. Enter the Username and
Password to return to the modem User Interface.
Page 43 / 119
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
39
6
Understanding the Advanced Menu
Advanced options provide settings to configure your gateway, such as MAC filtering and
port forwarding.
Topics
See the following topics:
Using the Options Option on page 39
Using the IP Filtering Option on page 42
Using the MAC Filtering Option on page 43
Using the Port Filtering Option on page 44
Using the Forwarding Option on page 46
Using the Port Triggers Option on page 51
Using the Pass Through Option on page 54
Using the DMZ Host Option on page 55
Steps
To access the advanced menu:
1.
Access the Web user interface. Refer to
Accessing the Web User Interface Locally on
page 18
.
2. Click
Advanced
from the main menu.
6.1
Using the Options Option
Use the
Options
option to define which networking protocols are enabled or disabled on
the device. The network address translation application-level gateway (NAT ALG) settings
provide additional security beyond the firewall.
Steps
To enable or disable network protocols:
1.
Click
Advanced
from the main menu.
2. The
Options
screen is displayed. Field descriptions are listed below the screen
example.
Page 44 / 119
Ubee Interactive
Using the Options Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
40
Label
Description
WAN Blocking
When enabled, WAN Blocking blocks PING access to the
WAN Public Gateway IP address that is exposed to the
Internet. When disabled, PING access is allowed to occur,
which is necessary for the remote configuration of some VoIP
phones (e.g., Cisco, Polycom).
Ipsec PassThrough
When enabled, allows encrypted IPsec VPN traffic to pass
through the router between the IPsec VPN Client application
on the PC/Mac and the IPsec VPN Concentrator (e.g.,
Barracuda, Cisco, Juniper, etc.) for access to the “company
VPN.”
PPTP PassThrough
When enabled, allows encrypted PPTP VPN traffic to pass
through the router between the PPTP VPN Client application
on the PC/Mac and the PPTP VPN Server (e.g., Windows
Server, 2013) for access to the “company VPN.”
Page 45 / 119
Ubee Interactive
Using the Options Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
41
Remote Config Management
Enables or disables access to the device from a remote
system in order to configure settings. Remote management
can be achieved by using SNMP, web/HTTP or telnet.
Multicast Enable
Optimizes the bandwidth utilization compared with unicast
(especially video streaming applications).
UPnP Enable
Activates Universal Plug and Play (UPnP) when enabled. A
UPnP device can dynamically join a network, obtain an IP
address, convey its capabilities, and learn about other devices
on the network. In turn, a device can leave a network smoothly
and automatically when it is no longer in use. Gaming
consoles and Web cameras are examples of devices that can
use UPnP.
Primary Network Bridged
When enabled, all wireless traffic sourced from the primary
SSID will be bridged.
NAT ALG Status
– Filters to allow (enable) or disallow (disable) protocols to pass through the
DVW326 to connected devices (computers, game consoles, and so on).
RSVP
Enables or disables resource reservation protocol (RSVP).
RSVP defines how applications reserve resources and how
they free the reserved resources once they are no longer
needed.
FTP
Enables or disables the file transfer protocol (FTP) used to
transfer files from one host to another.
TFTP
Enables or disables the trivial file transfer protocol (TFTP) – a
simpler protocol generally used for automated file transfers.
Kerb88
Enables or disables the Kerberos network authentication
protocol which allow nodes to communicate over a non-secure
network using “tickets” on port 88 to prove their identity to one
another.
NetBios
Enables or disables the network basic input/output system
(NetBIOS) services related to the OSI session layer. NetBIOS
allows applications on separate computers to communicate
over a LAN.
IKE
Enables or disables the network key exchange (IKE) protocol
used to set up a security association (SA) in the IPsec protocol
suite.
RTSP
Enables or disables the real time streaming protocol (RTSP)
network control protocol used to establish and control media
sessions between end points.
Kerb1293
Enables or disables the Kerberos network authentication
protocol which allows nodes to communicate over a non-
secure network using “tickets” on port 1293.
H225
Enables or disables the H.225 protocol used to define
messages and procedures for call signaling, media
packetization, and registration, admission, and status (RAS)
functions.
Label
Description

Rate

4 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top