1. Home
    2. /
  2. Manuals
    3. /
  3. Ubee
    4. /
  4. DVW326
    5. /
  5. 8
Page 36 / 119 Scroll up to view Page 31 - 35
Ubee Interactive
Using the DHCP Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
•
March 2014
32
5.2
Using the DHCP Option
Use the
DHCP
option to configure dynamic host configuration protocol-specific behavior
on the device.
Steps
To configure DHCP settings:
1.
Click
Basic
from the main menu.
2. Click
DHCP
from the left side menu. Field descriptions are listed below the screen
example.
WAN Connection Type
Selects the WAN connection type. For each type, different data
entry is required, as explained below:
DHCP: The WAN interface is set to a DHCP client, and
the IP address is assigned by the service provider’s DHCP
server.
Static IP: For Static IP, you must manually enter the IP
address for the WAN interface.
PPTP (dhcp): For Point to Point Tunneling Protocol
(PPTP), you must enter a username, password, and the
PPTP server’s IP address.
PPTP (static):
L2TP (dhcp):
L2TP (static):
IPv4 MTU Size
Defines the maximum transmission unit (MTU) size. MTU
defines the largest size of the packet or frame that the device
can transfer (256-1500). If this is not given by your service
provider, use 0 for the default.
Apply
Saves changes.
Label
Description
Page 37 / 119
Ubee Interactive
Using the DHCP Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
•
March 2014
33
Label
Description
DHCP Server
Enables (Yes) or disables (No) DHCP on the device. If No is
selected, all the static DHCP rules in this screen are ignored.
Starting Local Address
Defines the starting local IP address for the pool of IP
addresses that can be used by connecting clients. Private
addresses are translated to public IPs to be used on the
network.
Number of CPEs
Defines the maximum number of customer premises
equipment devices (CPE) that can connect to the network
through the DVW326.
Lease Time
Defines the DHCP lease time duration in minutes between 1
and 71582788. A DHCP user's PC gets an IP address with a
lease time. When the lease time expires, the PC must connect
to the DHCP server and be issued a new unused IP address.
Note:
The default DHCP lease time is 3600 seconds and
should be changed to
86400
seconds (24 hours). This helps
resolve connectivity issues with some iMAC and Windows 7
devices that turn off the network interface when they go into
standby mode. This results in slow Web browsing until the
device gets a new IP address via DHCP.
Apply
Saves changes.
Page 38 / 119
Ubee Interactive
Using the DDNS Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
•
March 2014
34
5.3
Using the DDNS Option
Use the dynamic domain name system (DDNS) to assign a changing IP address to a
constant pre-defined host name. The host can then be contacted by other hosts on the
Internet, even if its IP address changes.
The DDNS service for the DVW326 is provided through a third-party and can be
purchased from Dynamic Network Services Inc. at www.dynDNS.com.
Steps
To use the DDNS option:
1.
Click
Basic
from the main menu.
2. Click
DDNS
from the left side menu. Field descriptions are listed below the screen
example.
DHCP Clients
Lists all DHCP clients currently connected to the device, either
via an Ethernet link, or via a wireless connection. Each client
is listed with the following information:
MAC Address / IP Address / Subnet Mask
Duration: Duration displays the accumulated time since
the client acquired the IP address.
Expires: Expires is the time until the IP expires and must
be recycled. If the IP address is reserved to a certain
host, it shows STATIC IP ADDRESS.
Select: Reserves the current private IP address to be
assigned to this host statically when selected.
Current System Time
Displays the current system time.
Force Available
Activates a selected rule in the DHCP Clients list and assigns
IP addresses.
Note:
The Select button must be activated in
the DHCP list.
Label
Description
Page 39 / 119
Ubee Interactive
Using the Backup Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
•
March 2014
35
5.4
Using the Backup Option
The Backup option lets you backup your device configuration or restore the DVW326 to a
previously saved configuration.
Steps
To use the backup option:
1.
Click
Basic
from the main menu.
2. Click
Backup
from the left side menu.
5.4.1
Backing Up the Current Modem Configuration
To backup and save the current modem configuration, click the
Backup
button.
A pop-up window appears instructing you to select ‘Save’ when prompted. Click ‘
OK
’.
Label
Description
DDNS Service
Enables or disables the DDNS service. When enabled, this
service is available from www.dynDNS.org.
User Name
Defines the user name for the DDNS account.
Password
Defines the password for the DDNS account.
Host Name
Defines the host name for the DDNS account.
IP Address
Displays the IP address for the DDNS account.
Status
Displays if the DDNS service is enabled or disabled.
Apply
Saves changes.
Page 40 / 119
Ubee Interactive
Using the Backup Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
•
March 2014
36
The following window appears, giving you the option to save the file. Click the ‘
Save File
’
option and click ‘
OK
’.
The file will be saved to your Downloads folder as a binary file (.bin) titled
‘GatewaySettings.bin.’
5.4.2
Restoring the DVW326 to a Previously Saved Configuration
To restore the modem to a previously saved configuration, click the
Browse
button.
The File Upload dialog box appears and allows you to select the previously saved backup
file. Highlight the file and click ‘
Open
’.

Rate

4 / 5 based on 1 vote.

Popular Ubee Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top