Ubee Interactive

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

62

Label

Description

Add User

Remove User

Enable

Defines user accounts.



To add a new user, add the user name and click Add

User. The user then becomes selectable in the User

Settings drop down menu.



To select an existing user, choose the user from the User

Settings drop down menu.



To activate the user, check Enable.



To remove a user, select the user from the User Settings

drop down menu and click Remove User.

Password

Defines the password for this user. It is required when this

user tries to access the Internet via the device.

Re-Enter Password

Confirms the password with the re-entered password.

Trusted User

Defines the selected user as a trusted user when enabled is

checked. The user is limited to timing and content when

visiting the Internet, as defined in the following fields.

Content Rule

Selects from the drop down menu an existing content rule that

defines what kind of Websites the user can or cannot visit.

White List Access Only

Selects the White List Access option. If you have created a

content rule that defines a black list and white list, select the

White List Access Only checkbox to force the DVW326 to

execute the policy for the selected user.

Ubee Interactive

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

63

8.2

Using the Basic Option

The

Basic

option allows you to select rules to block certain Internet content and Web

sites. After you change your Access Control settings, click the appropriate Apply, Add, or

Remove button for your new settings to take effect. Refresh your browser’s display to see

the currently active settings.

Steps

To filter Internet content and Web sites:

1.

Click the

Access Control

link from the top of the screen.

2. Click

Basic

from the left side of the screen. The

Basic

fields are explained following

this screen example.

Time Access Rule

Selects a defined time access rule to apply to the selected

user.

Session Duration

Allows you to enter a time in minutes for the user’s session to

expire. When the session expires, the user can log in again for

the same session duration.

Inactivity Time

Allows you to enter the time out value when a user has no

activity on the Internet. When the time expires, the user

interface to the Internet is canceled.

Apply

Saves all changes when clicked.

Trusted Computers

Defines the trusted hosts that can bypass the Access Control

Process.

Add

Adds the trusted host’s MAC address entered in the given

area and Add is clicked.

Remove

Removes a trusted computer from the list when it is

highlighted and Remove is clicked.

Label

Description

Ubee Interactive

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

64

Label

Description

Enable Access Control

Activates the Access Control feature when checked.

Apply

Saves all changes in the screen and activates Access Control,

if enabled.

Content Policy Configuration

Add New Policy

Adds a policy to the Policy List. Enter the policy name and

click Add New Policy. The policy then becomes selectable in

the Content Policy List drop down menu.

Content Policy List

Lists existing policies you can choose to use.

Remove Policy

Deletes a policy from the list. Select the policy from the

Content Policy List drop down menu and click Remove Policy.

Keyword List

Displays keywords you can use to block Web site addresses

(URLs) containing those words.

Add Keyword

Adds a keyword to the keyword list. Enter the word in the field

next to the Add Keyword button and click Add Keyword. The

keyword is added to the Keyword list.

Ubee Interactive

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

65

8.3

Using the ToD Filter Option

The

ToD

(Time of Day)

Filter

option allows the configuration of time-based access

policies to block all Internet traffic at specified times.

Steps

To configure ToD filters:

1.

Click the

Access Control

link from the top of the screen.

2. Click

ToD Filter

from the left side of the screen. The

ToD Filter

fields are explained

following this screen example.

Remove Keyword

Removes a keyword from the keyword list. Select the keyword

from the Keyword List, and click Remove Keyword.

Blocked Domain List

Displays Web domains (for example, unwanted.com) you can

use to block access to those domains.

Add Domain

Adds a domain to the Blocked Domain List. Enter a domain in

the field next to the Add Domain button, and click Add Domain.

Remove Allowed Domain

Removes a domain from the Blocked Domain List. Select the

domain from the Blocked Domain List, and click Remove

Domain.

Allowed Domain List

Displays domains you want to allow access to.

Add Allowed Domain

Adds allowed domains to the list. Enter the name and click

Add Allowed Domain.

Remove Allowed Domain

Removes domain names from the Allowed Domain List.

Highlight the domain from the list and click Remove Allowed

Domain.

Override Password

If you encounter a blocked website, you can override the block

by entering a password.

Password

Enter a password for overriding blocked websites.

Re-Enter Password

Re-enter the password.

Access Duration

Set a time duration (in minutes) for access to the blocked site

when the block has been overridden by entering the password.

Apply

Saves the password and access duration time.

Label

Description

Ubee Interactive

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

66

Label

Description

Add New Policy

Adds a new policy. Enter a policy name in the field next to the

Add New policy button, and click the Add New Policy button.

The policy then becomes selectable in the Time Access Policy

List drop down menu.

Time Access Policy List

Lists the existing policies in a drop-down menu.

Enabled

Activates a policy. Select the policy from the Time Access

Policy List drop-down menu and check Enabled.

Remove

Deletes a policy. Select the policy from the Time Access Policy

List drop-down menu and click Remove.

Days to Block

Selects the days to block Internet access.

Time to Block:

All Day or a specific time frame

Allows you to define the times of day to block.



To block all day, check All Day to eliminate all access

during the days selected.



To block a specific time frame to block Internet access for

the days selected, enter the Start time and the End time.

Select AM or PM for each.

Ports to Block

Defines a port range to block if the Enabled box is checked.



Port Start: Enter the starting port number to be blocked.



Port End: Enter ending port number to be blocked.



Protocol: Select the protocol type. Options are UDP, TCP,

or Both.

Apply

Saves all changes when clicked.