Ubee Interactive

Using the Port Triggers Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

52

4. Enter information in the Port Trigger fields as shown below. Field descriptions follow

the screen shot.

Label

Description

Trigger Start Port

Defines a port number or the starting port number in a range

of trigger port numbers.

Trigger End Port

Defines a port number or the ending port number in a range of

trigger port numbers.

Target Start Port

Defines a port number or the starting port number in a range

of target port numbers.

Target End Port

Defines a port number or the ending port number in a range of

target port numbers.

Protocol

Defines the protocol type for this rule, UDP, TCP, or Both.

Ubee Interactive

Using the Port Triggers Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

53

5. Click

Apply

. The port trigger rule is created and displayed in the table. Additional field

descriptions are listed below the screen example.

The following example shows the Port Triggering option set up for a dual Xbox

configuration.

Description

Names the triggering rule.

Enabled

Enables (on) or disables (off) the triggering rule.

Apply

Saves changes.

Remove All

Removes all of the input host’s MAC addresses.

Label

Description

Remove All

Deletes all the port trigger rules.

Edit

Allows you to edit the properties of the selected rule.

Remove

Deletes the selected rule.

Label

Description

Ubee Interactive

Using the Pass Through Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

54

6.7

Using the Pass Through Option

Use the

Pass Through

option to configure a pass through table. Devices in the pass

through table are treated as bridge devices, storing and forwarding data between LAN

interconnections.

Steps

To configure a pass through table:

1.

Click

Advanced

from the main menu.

2. Click

Pass Through

from the left side menu. The pass through fields are explained

following this screen example.

Ubee Interactive

Using the DMZ Host Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

55

6.8

Using the DMZ Host Option

Use the

DMZ

(Demilitarized Zone)

Host

option to expose a host IP address to the WAN

(public Internet). You can use this option when applications do not work with port triggers

or other networking strategies.

Steps

To set up a DMZ host:

1.

Connect a PC to an Ethernet port on the DVW326. Make sure both devices are

powered on and functioning.

2. Connect a Home Gateway (or other device you wish to be in the DMZ) to an Ethernet

port on the DVW326.

3. Log in to the DVW326 Web user interface.

4. Click

Advanced

from the main menu.

5. Click

DMZ Host

from the left side menu.

6. Enter the IP address of the Home Gateway (host device) to be exposed to the WAN.

7. Test the device to ensure Internet access is available and the device is functional. For

example, connect to the Internet from a PC connected to the Home Gateway, or make

calls from a VoIP phone.

Label

Description

Pass Through MAC Addresses

Allows you to enter the input host’s MAC address.

Add MAC Address

Adds the entered MAC address.

Addresses entered: n/32

Displays the MAC addresses to be blocked. The number of

MAC addresses is shown as 0/32 where 0 is the number of

addresses in the list. You can add up to 32 MAC addresses at

one time.

Remove MAC Address

Removes the selected input host’s MAC address.

Clear All

Removes all of the input host’s MAC addresses.

Ubee Interactive

Using the DMZ Host Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

56

Label

Description

DMZ Address

Defines the IP address of the host to be exposed.

Apply

Saves changes.