Given below is full router user manual of TRENDnet TPL-110AP router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 11
Copyright ©2005.
All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
TPL-110AP
Version 07.12.2005
54Mbps 11g Wireless Powerline Access Point Quick Installation Guide
Point d'accès Powerline sans fil 11g 54Mbps
Guide d'installation rapide
Drahtloser 54 MBit/s 11g Powerline Access Point
Kurzanleitung zur Installation
Punto de acceso Powerline inalámbrico 11g a 54Mbps
Guía de instalación rápida
Page 2 / 11
Table of Contents
English
......................................................................................................
Troubleshooting
...........................................................................................
1
1
2
3
5
8
1. Prepare for Installation
......................................................................
2. Install Hardware
................................................................................
3. Configure TCP/IP Settings
................................................................
4. Configure the Access Point
...............................................................
Page 3 / 11
Thank you for purchasing TRENDnet's TPL-110AP 802.11g Powerline Access
Point
This guide will help you set-up your Access Point quickly and easily. Just follow
the step-by-step instructions below, and enjoy the benefits of accessing the
Internet without ever being tied down to wires" If you run into problems, please
refer to the Troubleshooting section. If you need further technical support,
please visit www.TRENDNET.com or call technical support by phone.
Verify Equipment
Before setting up the Access Point, you should have:
1.
A Computer with a Wired
(RJ45) network card and a powerline adapter or
Wireless network card.
2.
TCP/IP protocol installed on the Computer.
3.
A Web Browser such as Internet Explorer (5.0 or higher) or
Netscape Navigator (4.7 or higher).
Verify Package Contents
Please make sure you have everything in the box:
1
CD-ROM (User’s Guide)
Quick Installation Guide
TPL-110AP
1. Prepare for Installation
English QIG
English
TRENDnet
TPL-110AP
Page 4 / 11
2
1.
Locate an optimum location for the Access Point. The best place for the
Access Point is usually at the center of your wireless network.
2.
Plug the TPL-110AP into an available Power Outlet.
DO NOT plug the TPL-
110AP into a Power Surge protector.
2. Install Hardware
Make sure the front panel lights are on: Power, WLAN.
Verify Hardware Installation
NOTE:
If you are using a wired computer to configure the Access Point,
please connect this computer to your Powerline Router.
2
English
POWER
WLAN
Page 5 / 11
3
3. Configure TCP/IP Settings
Before the Access Point can be accessed and configured, the computer's
TCP/IP settings need to be changed. (That also includes your wireless card's
IP address)
English
Windows 2000/XP
1.
Find the
Start
button located on the Desktop.
2.
Click
Start
, and click on
Control Panel
.
For Windows 2000, click Start,
highlight Settings, and click
Control Panel
.
3.
Double-Click the
Network Connection
icon.
4.
Right-Click on the
Local Area Connection
icon, then click on
Properties
.
The Local Area Connection Properties box will appear.
19216811.live