Page 61 / 103
Scroll up to view Page 56 - 60
Chapter 2
Configure Touch P5 as a Router
56
4 )
Click
LAN settings
, deselect the following three options and click
OK
;
5 )
Go to
Advanced
>
Restore advanced settings
, and click
OK
.
Page 62 / 103
Chapter 2
Configure Touch P5 as a Router
57
5.
User another a web browser or computer and login again.
6.
Reset your Touch P5 to its factory default settings: with your Touch P5 powered on,
press and hold the
Reset
button on the back panel until the Touch P5 logo displays.
Note:
You’ll need to reconfigure your Touch P5 to surf the Internet once your Touch P5 is reset.
If this doesn’t solve the problem, please contact the technical support.
Q7. What can I do if I cannot find my wireless network or I cannot connect
to the wireless network?
1.
If you fail to find any wireless network, please follow the steps below:
1 )
Make sure the wireless function is enabled if you’re using a laptop with a built-
in wireless adapter. You can refer to the relevant document or contact the
laptop manufacturer.
2 )
Make sure the wireless adapter driver is installed successfully and the wireless
adapter is enabled.
On Windows 7
a.
If you see the message
No connections are available
, it is usually because
the wireless function is disabled or blocked somehow;
b.
Click
Troubleshoot
and Windows might fix the problem itself.
Page 63 / 103
Chapter 2
Configure Touch P5 as a Router
58
On Windows XP
a.
If you see the message
Windows cannot configure this wireless connection
,
this is usually because windows configuration utility is disabled or you are
running another wireless configuration tool to connect the wireless;
b.
Exit the wireless configuration tool( the TP-LINK Utility, for example);
c.
Select and right click
My Computer
on desktop, and select
Manage
to open
Computer Management window;
d.
Expand
Services and Applications
>
Services
, and find and locate
Wireless
Zero Configuration
in the Services list on the right side;
e.
Select and right click
Wireless Zero Configuration
, and then select
Properties
;
f.
Change
Startup type
to
Automatic
, click
Start
and make sure the
Service
status
is
Started
. And then click
OK
;
g.
Try to connect to the wireless network.
2.
If you can find other wireless networks except your own, please follow the steps
below:
1 )
Make sure your computer/device is still in the range of your Touch P5/modem.
Move it closer if it is currently too far away;
2 )
Tap the
Wireless Settings
icon to start it, and be sure the wireless function is
enabled. Double check your Network Name, and make sure the SSID is not
hided.
Page 64 / 103
Chapter
3
Configure Touch P5 as a
Repeater
This chapter introduces how to connect and configure your Touch P5 in
repeater
mode
which will extend the existing wireless coverage by repeating the wireless
signal. We recommend that you use repeater mode when you want a larger wireless
coverage to eliminate “dead zones”. You can also use Touch P5 as an adapter to
connect any Ethernet-enabled device (such as a Blu-ray player, game console, DVR, or
smart TV) to your Wi-Fi network.
This chapter includes the following sections:
•
Quick Setup
•
Entertainment Adapter
•
Mode Selection
•
Wireless Settings
•
Devices Control
•
LAN
•
DHCP Server
•
Screen Settings
•
Reboot & Reset
•
Administrator Password
•
About
•
FAQ
Page 65 / 103
Chapter 3
Configure Touch P5 as a Repeater
60
3. 1.
Quick Setup
Touch P5 supports two configuration methods:
Web-based utility
and
Touchscreen
utility
.
Web-based utility
includes the configuration for all functions, and it requires a
connection (wired or wireless) between your Touch P5 and the device you are using
to log into the web management page.
Touchscreen utility
supports configuration for
most commonly used functions, and the configuration can be easily done within a few
taps on the touchscreen.
In this chapter, we will introduce most of the configuration through the touchscreen
utility.
3. 1. 1.
Option 1: Through Touchscreen Utility (Recommended)
The Quick Setup app on the touchscreen will guide you through the process to connect
your Touch P5 to the host network and set up its extended network.
1.
Install the antennas and position them vertically.
2.
Plug your Touch P5’s power adapter into an electrical outlet
near
your host router.
Turn it on and wait until the system boot on the screen completes.
3.
On the menu screen, tap the
Mode Selection
icon to start it.
4.
Select
Repeater
mode and tap
Save
.
Note:
Your Touch P5 will reboot to make your changes take effect, and please do
NOT
operate during the
process.
19216811.live