Page 46 / 103 Scroll up to view Page 41 - 45
Chapter 2
Configure Touch P5 as a Router
41
1 ) Visit
http://tplinkwifi.net
, and then log in with the username and password you
set for your Touch P5.
2 )
Go to
Advanced
>
USB Settings
>
Sharing Access
.
3 )
Select
Use Default Account
(admin) or
Use New Account
and click
Save
.
4 )
Enable
Authentication
to apply the sharing account.
If you leave
Share All
enabled, click the button to enable
Authentication
for all
folders.
If
Share All
is disabled, enable
Authentication
for specific folders.
3.
Enable the FTP(via Internet): tick the check box to enable
FTP(Via Internet)
, and
click
Save
.
4.
Access Your USB Disk via Internet: now different clients with Internet connection
can access the USB disk.
Page 47 / 103
Chapter 2
Configure Touch P5 as a Router
42
Computer
• To download, launch a web browser and type the server address
ftp://<WAN IP address of your Touch P5>:<port number>
(such as
) or
ftp://<domain name of your Touch P5>:<port
number>
(such as
ftp://MyDomainName:21
) in the address bar, and
then press
Enter
on the keyboard.
• To upload, use a third-party app for network files management.
Pad
• Use a third-party app for network files management.
Note:
Click
DDNS
to learn how to set up a domain name for your Touch P5.
Customize Your Settings
By default,
Share All
is enabled so all contents on the USB disk are shared. If you want
to only share specific folders, follow the steps below:
1.
Visit
http://tplinkwifi.net
, and then log in with the username and password you set
for your Touch P5.
2.
Go to
Basic
>
USB Settings
>
Sharing Access
.
3.
Focus on the section of
Folder Sharing
. Click the button to disable
Share All
, and
then click
Add
to add a new sharing folder.
4.
Tick
Enable Authentication
. If you allow network clients to modify this folder, tick
Enable Write Access
.
5.
Click
OK
.
Page 48 / 103
Chapter 2
Configure Touch P5 as a Router
43
Note:
Touch P5 can share eight volumes at most. You can click
on the page to detach the corresponding volume
you do not need to share.
2. 20. 3.
Media Sharing
The feature of
Media Sharing
allows you to view photos, play music and watch movies
stored on the USB disk directly from DLNA-supported devices, such as your computer,
pad and PS2/3.
Access the USB disk
1.
Connect Your USB Disk: insert your USB storage device into your Touch P5’s USB
port directly or using a USB cable. Wait several seconds until the USB LED becomes
solid on.
Note:
1.
If you use USB hubs, make sure no more than four devices are connected to your Touch P5.
2.
If the USB storage device requires using bundled external power, make sure the external power has been
connected.
3.
If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
4.
Before you physically disconnect a USB device from your Touch P5, safely remove it to avoid data damage:
select
Advanced
>
USB Settings
>
Device Settings
and click
.
2.
Access the Media Files on Your USB Disk: now the DLNA-supported devices
connected to your Touch P5 can detect and play the media files on the USB disks.
For example:
Windows
computer
a .
Open the Windows Media Player.
b .
Click the media server name (
Touch_P5-share
by default) under
the list of
Other Libraries
, and then you can directly view photos,
play music and watch movies that you share on the USB disks.
Pad
Use a third-party DLNA-supported player.
Customize Your Settings
¾
To Only Share Specific Content
By default,
Share All
is enabled so all contents on the USB disk are shared. If you want
to only share specific folders, follow the steps below:
1.
Visit
http://tplinkwifi.net
, and then log in with the username and password you set
for your Touch P5.
2.
Go to
Basic
>
USB Settings
>
Sharing Access
.
3.
Focus on the section of
Folder Sharing
. Click the button to disable
Share All
, and
then click
Add
to add a new sharing folder.
Page 49 / 103
Chapter 2
Configure Touch P5 as a Router
44
4.
Select the
Volume Name
and
Folder Path
, then enter a
Folder Name
as you like.
5.
Tick
Enable Media Sharing
and click
OK
.
Note:
Touch P5 can share eight volumes at most. You can click
on the page to detach the corresponding volume
you do not need to share.
¾
To Specify the Media Server
You can also modify the media server name or disable the feature of Media Sharing as
needed.
1.
Visit
http://tplinkwifi.net
, and then log in with the password you set for your Touch
P5.
2.
Select
Basic
>
USB Settings
>
Sharing Access
.
3.
Enter a
Network/Media Server Name
as you like, such as
MyShare
.
4.
Click
Save
.
Page 50 / 103
Chapter 2
Configure Touch P5 as a Router
45
2. 21.
IPv6 Connection
If your ISP provides IPv6 connection and has provided some detailed IPv6 parameters,
you can configure your Touch P5 to permit IPv6 connection.
1.
Visit
http://tplinkwifi.net
, and then log in with the username and password you set
for your Touch P5.
2.
Go to
Advanced
>
IPv6
to enable IPv6 connection.
3.
Select the Internet connection type provided by ISP. Fill in the information as
required and click
Save
.
Note:
If you do not know what your Internet connection type is, contact your ISP or judge according to the
information provided by your ISP.
1 )
Static IP
: Fill in blanks.
2 )
Dynamic IP
: Click
Advanced
to have more configuration if ISP requires..
3 )
PPPoE
: Fill in the Username and Password. Click
Advanced
to have more
configuration if ISP requires.
4 )
6to4 Tunnel
: An IPv4 Internet connection type is a prerequisite for this
connection type. Click
Advanced
to have more configuration if ISP requires.
5 )
Pass-Through (Bridge)
: Skip to Step 5.
4.
Configure LAN ports. Windows users are recommended to choose from the first
two types. Fill in
Address Prefix
provided by ISP, and click
Save
.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top