TP-Link TL-WR941ND Router Manual PDF (Setup & Configuration Guide)

Page 71 / 113 Scroll up to view Page 66 - 70

TL-WR941ND

Wireless N Router

6.

In the Status field, you can select

Enabled

or

Disabled

to enable or disable your entry.

7.

Click the

Save

button.

Click the

Enable All

button to enable all the rules in the list.

Click the

Disable All

button to disable all the rules in the list.

Click the

Delete All

button to delete all the entries in the table.

Click the

page.

Figure 4-42

Add or Modify Parental Control Entry

For example

: If you desire that the child PC with MAC address 00-11-22-33-44-AA can access

www.google.com on Saturday only while the parent PC with MAC address 00-11-22-33-44-BB is

without any restriction, you should follow the settings below.

1. Click “

Parental Control

” menu on the left to enter the Parental Control Settings page.

Check Enable and enter the MAC address 00-11-22-33-44-BB in the MAC Address of

Parental PC field.

2. Click “

Access Control

→

Schedule

” on the left to enter the Schedule Settings page.

Click

Add New...

button to create a new schedule with Schedule Description is

Schedule_1, Day is Sat and Time is all day-24 hours.

-62-

Page 72 / 113

TL-WR941ND

Wireless N Router

3. Click “

Parental Control

” menu on the left to go back to the Add or Modify Parental

Control Entry page:

z

Click

Add New...

button.

z

Enter 00-11-22-33-44-AA in the

MAC Address of Child PC

field.

z

Enter “Allow Google” in the

Website Description

field.

z

Enter “www.google.com” in the

Allowed Domain Name

field.

z

Select “Schedule_1” you create just now from the

Effective Time

drop-down list.

z

In

Status

field, select Enable.

4. Click

Save

to complete the settings.

Then you will go back to the Parental Control Settings page and see the following list, as

shown in Figure 4-43.

Figure 4-43

Parental Control Settings

4.11 Access Control

Figure 4-44 Access Control

There are four submenus under the Access Control menu as shown in Figure 4-44:

Rule

,

Host

,

Target

and

Schedule

. Click any of them, and you will be able to configure the corresponding

function.

4.11.1

Rule

Choose menu “

Access Control

→

Rule

”, you can view and set Access Control rules in the

screen as shown in Figure 4-45.

-63-

Page 73 / 113

TL-WR941ND

Wireless N Router

Figure 4-45

Access Control Rule Management

¾

Enable Internet Access Control -

Select the check box to enable the Internet Access

Control function, so the Default Filter Policy can take effect.

¾

Rule Name -

Here displays the name of the rule and this name is unique.

¾

Host -

Here displays the host selected in the corresponding rule.

¾

Target -

Here displays the target selected in the corresponding rule.

¾

Schedule -

Here displays the schedule selected in the corresponding rule.

¾

Action -

Here displays the action the Router takes to deal with the packets. It could be

Allow

or

Deny

.

Allow

means that the Router permits the packets to go through the Router.

Deny

means that the Router rejects the packets to go through the Router.

¾

Status -

This field displays the status of the rule.

Enabled

means the rule will take effect,

Disabled

means the rule will not take effect.

¾

Modify -

Here you can edit or delete an existing rule.

To add a new rule, please follow the steps below.

1. Click the

Add New…

button and the next screen will pop-up as shown in Figure 4-46.

2.

Give a name (e.g. Rule_1) for the rule in the

Rule Name

field.

3.

Select a host from the

Host

drop-down list or choose “

Click Here To Add New Host List

”.

4. Select a target from the

Target

drop-sown list or choose “

Click Here To Add New Target

List

”.

5. Select a schedule from the

Schedule

drop-down list or choose “

Click Here To Add New

Schedule

”.

-64-

Page 74 / 113

TL-WR941ND

Wireless N Router

6. In the

Action

field, select

Deny

or

Allow

.

7. In the

Status

field, select

Enabled

or

Disabled

to enable or disable your entry.

8.

Click the

Save

button.

Click the

Enable All

button to enable all the rules in the list.

Click the

Disable All

button to disable all the rules in the list.

Click the

Delete All

button to delete all the entries in the table.

You can change the entry’s order as desired. Fore entries are before hind entries. Enter the ID

number in the first box you want to move and another ID number in second box you want to move

to, and then click the

Move

button to change the entry’s order.

Click the

page.

Figure 4-46

Add or Modify Internet Access Control Entry

For example

: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access

www.google.com

only from

18:00

to

20:00

on

Saturday and Sunday

, and forbid other hosts in

the LAN to access the Internet, you should follow the settings below:

1. Click “

Access Control

→

Host

” in the left to enter the Host Settings page. Add a new

entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.

2. Click “

Access Control

→

Target

” in the left to enter the Target Settings page. Add a

new entry with the Target Description is Target_1 and Domain Name is

www.google.com.

3. Click “

Access Control

→

Schedule

” in the left to enter the Schedule Settings page.

Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start

Time is 1800 and Stop Time is 2000.

-65-

Page 75 / 113

TL-WR941ND

Wireless N Router

4. Click “

Access Control

→

Rule

” in the left to return to the Access Control Rule

Management page. Select “

Enable Internet Access Control

” and choose "Deny the

packets not specified by any access control policy to pass through the Router".

5. Click

Add New...

button to add a new rule as follows:

z

In

Rule Name

field, create a name for the rule. Note that this name should be

unique, for example Rule_1.

z

In

Host

field, select Host_1.

z

In

Target

field, select Target_1.

z

In

Schedule

field, select Schedule_1.

z

In

Action

field, select Allow.

z

In

Status

field, select Enable.

z

Click

Save

to complete the settings.

Then you will go back to the Access Control Rule Management page and see the following list.

4.11.2 Host

Choose menu “

Access Control

→

Host

”, you can view and set a Host list in the screen as

shown in Figure 4-47. The host list is necessary for the Access Control Rule.

Figure 4-47

Host Settings

¾

Host Description -

Here displays the description of the host and this description is unique.

¾

Information -

Here displays the information about the host. It can be IP or MAC.

¾

Modify -

To modify or delete an existing entry.

To add a new entry, please follow the steps below.

1.

Click the

Add New…

button.

2.

In the

Mode

field, select IP Address or MAC Address.

z

If you select IP Address, the screen shown is Figure 4-48.

1) In

Host Description

field, create a unique description for the host (e.g. Host_1).

-66-

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share