TP-Link TL-WR842ND Router Manual PDF (Setup & Configuration Guide)

Page 26 / 130 Scroll up to view Page 21 - 25

TL-WR842ND

300Mbps Multi-Function Wireless N Router

- 18 -

Figure 3-14

Quick Setup - Finish

If there is anything changed on the

Wireless

page, you will see the

Finish

page as shown in

Figure 3-15. Click the

Reboot

button to make your wireless configuration take effect and

finish the

Quick Setup

.

Figure 3-15

Quick Setup – Finish

Page 27 / 130

TL-WR842ND

300Mbps Multi-Function Wireless N Router

- 19 -

Chapter 4. Configuring the Router

This chapter will show each Web page's key functions and the configuration way.

4.1

Login

After your successful login, you will see the sixteen main menus on the left of the Web-based utility.

On the right, there are the corresponding explanations and instructions.

The detailed explanations for each Web page’s key function are listed below.

4.2

Status

The Status page provides the current status information about the Router. All information is

read-only.

Page 28 / 130

TL-WR842ND

300Mbps Multi-Function Wireless N Router

- 20 -

Figure 4-1

Router Status

4.3

Quick Setup

Please refer to

3.2 Quick Installation Guide

.

Page 29 / 130

TL-WR842ND

300Mbps Multi-Function Wireless N Router

- 21 -

4.4

WPS

This section will guide you to add a new wireless device to an existing network quickly by WPS

(Wi-Fi Protected Setup)

function.

a).

Choose menu “WPS”, and you will see the next screen (shown in Figure 4-2 ).

Figure 4-2

WPS

¾

WPS Status -

Enable or disable the WPS function here.

¾

Current PIN -

The current value of the Router's PIN is displayed here. The default PIN of the

Router can be found in the label or User Guide.

¾

Restore PIN -

Restore the PIN of the Router to its default.

¾

Gen New PIN -

Click this button, and then you can get a new random value for the Router's

PIN. You can ensure the network security by generating a new PIN.

¾

Add device -

You can add a new device to the existing network manually by clicking this

button.

b).

To add a new device:

If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless

connection between wireless adapter and Router using either Push Button Configuration (PBC)

method or PIN method.

)

Note:

To build a successful connection by WPS, you should also do the corresponding configuration of

the new device for WPS function meanwhile.

I.

Use the Wi-Fi Protected Setup Button

Use this method if your client device has a Wi-Fi Protected Setup button.

Step 1:

Press the

WPS/RESET

button on the back panel of the Router, as shown in the following

figure.

Page 30 / 130

TL-WR842ND

300Mbps Multi-Function Wireless N Router

- 22 -

You can also keep the default WPS Status as

Enabled

and click the

Add device

button

in Figure 4-2, then Choose “

Press the button of the new device in two minutes

” and

click

Connect

. (Shown in the following figure)

Figure 4-3 Add A New Device

Step 2:

Press and hold the WPS button of the client device directly.

Step 3:

The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup

process.

Step 4:

When the WPS LED is on, the client device has successfully connected to the Router.

Step 5:

Refer back to your client device or its documentation for further instructions.

II.

Enter the client device’s PIN on the Router

Use this method if your client device has a Wi-Fi Protected Setup PIN number.

Step 1:

Keep the default WPS Status as

Enabled

and click the

Add device

button in Figure 4-2,

then the following screen will appear.

Figure 4-4

Add A New Device

Step 2:

Enter the PIN number from the client device in the field on the above WPS screen. Then

click

Connect

button.

Step 3:

“

Connect successfully

” will appear on the screen of Figure 4-4, which means the client

device has successfully connected to the Router.

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share