TL-WR743ND

150Mbps Wireless AP/Client Router

- 32 -

Figure 3-32 Wireless



Wireless Name of WISP Station

（

SSID

）

-

The SSID of the AP your Router is going to connect

to as a client. You can also use the search function to select the SSID to join.



MAC Address of WISP Station

（

BSSID

）

-

The BSSID of the AP your Router is going to

connect to as a client. You can also use the search function to select the BSSID to join.



Survey -

Click this button, you can survey the AP which runs in the current channel.



Region

-

Select your region from the pull-down list. This field specifies the region where the

wireless function of the Router can be used. It may be illegal to use the wireless function of

the Router in a region other than one of those specified in this field. If your country or region

is not listed, please contact your local government agency for assistance.

When you select your local region from the pull-down list, click the

Save

button

,

then the

Note Dialog appears. Click

OK

.

Note Dialog



Note:

Limited by local law regulations, version for North America does not have region selection option.



Wireless Security Mode -

This option should be chosen according to the AP's security

configuration. It is recommended that the security type is the same as your AP's security type.



Wireless Password -

If the AP your Router is going to connect needs password, you need to

fill the password in this blank.

TL-WR743ND

150Mbps Wireless AP/Client Router

- 33 -

Click

Survey

button on the Wireless page as shown in Figure 3-32, and then AP List page will

appear as shown in Figure 3-33. Find the SSID of the Access Point you want to access, and click

Connect

in the corresponding row. For example, the first item is selected. The target network’s

SSID will be automatically filled into the corresponding box which is shown as the Figure 3-34.

Figure 3-33 AP List

Figure 3-34



Note:

If you know the SSID of the desired AP, you can also input it into the field "Wireless Name of

Root AP" manually.

2.

You will see the Network page as shown in Figure 3-36. Please configure the IP parameters of

LAN on this page, and then click

Next

.

TL-WR743ND

150Mbps Wireless AP/Client Router

- 34 -

Figure 3-35 Quick Setup – Network



DHCP Server - Enable

or

Disable

the server. If you disable the Server, you must have

another DHCP server within your network or else you must configure the IP address of the

computer manually.



IP Address -

Enter the IP address of your system in dotted-decimal notation (factory default:

192.168.0.1).



Subnet Mask -

An address code that determines the size of the network. Normally

255.255.255.0 is used as the subnet mask.



Note:

If you change the IP address, you must use the new IP address to login the system.



Change the login account -

if you select the

YES

radio, you can modify your login user

name and password.



Note:

The new user name and password must not exceed 14 characters in length and must not

include any spaces. Enter the new Password twice to confirm it.

5.

Click the

Next

button. You will then see the page as shown in Figure 3-36. Please click the

Reboot/Finish

button to make your configuration take effect and finish the

Quick Setup

.

TL-WR743ND

150Mbps Wireless AP/Client Router

- 35 -

Figure 3-36 Quick Setup – Finish



Note:

You may click the

Save

button to save these settings as a text file for future reference.

TL-WR743ND

150Mbps Wireless AP/Client Router

- 36 -

Chapter 4. Configuring the Router

This chapter will show each Web page's key functions and the configuration way.

4.1 Login

After your successful login, you will see the sixteen main menus on the left of the Web-based utility.

On the right, there are the corresponding explanations and instructions.

Figure 4-1 the main menu

The detailed explanations for each Web page’s key function are listed below.

4.2 Status

The Status page provides the current status information about the Router. All information is

read-only.