TL-WR743ND
150Mbps Wireless AP/Client Router
- 38 -
Figure 4-3
WPS
WPS Status -
Enable or disable the WPS function here.
Current PIN -
The current value of the Router's PIN is displayed here. The default PIN of the
Router can be found in the label or User Guide.
Restore PIN -
Restore the PIN of the Router to its default.
Gen New PIN -
Click this button, and then you can get a new random value for the Router's
PIN. You can ensure the network security by generating a new PIN.
Disable Router’s PIN -
WPS external register of entering the device’s PIN can be disabled
or enabled manually. If the device receives multiple failed attempts to authenticate an
external Register, this function will be disabled automatically.
Add Device -
You can add a new device to the existing network manually by clicking this
button.
b).
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
I.
By PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Method One:
Step 1:
Press the WPS button on the rear panel of the Router.
19216811.live