1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WR741N
    5. /
  5. 14
Page 66 / 113 Scroll up to view Page 61 - 65
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-59-
the Setup page of the Router's Web-Based Utility locally from inside the network, check the radio
button “
Only the PCs listed can browse the built-in web pages to perform Administrator
tasks
”, and then enter each MAC Address in a separate field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC address listed can
use the password to browse the built-in web pages to perform Administrator tasks while all the
others will be blocked.
After click the
Add
button, your PC's MAC Address will be placed in the list above.
Click the
Save
button to save your settings.
)
Note:
If your PC is blocked but you want to access the Router again, use a pin to press and hold the
Reset Button
(hole) on the back panel for about 5 seconds to reset the Router’s factory defaults
on the Router’s Web-Based Utility.
4.9.4
Remote Management
Choose menu “
Security
→
Remote Management
”, and then you can configure the Remote
Management function in the screen as shown in Figure 4-55. This feature allows you to manage
your Router from a remote location via the Internet.
Figure 4-55 Remote Management
¾
Web Management Port -
Web browser access normally uses the standard HTTP service
port 80. This Router's default remote management web port number is 80. For greater
security, you can change the remote management web port to a custom port by entering that
number in the box provided. Choose a number between 1 and 65534 but do not use the
number of any common service port.
¾
Remote Management IP Address
-
This is the current address you will use when accessing
your Router from the Internet. This function is disabled when the IP address is set to the
default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address. If set to
255.255.255.255, then all the hosts can access the Router from internet.
)
Note:
1.
To access the Router, you should type your Router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your Router's WAN address is 202.96.12.8, and the port number
Page 67 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-60-
used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked
for the Router's password. After successfully entering the username and password, you will
be able to access the Router's web-based utility.
2.
Be sure to change the Router's default password to a very secure password
.
4.10 Parental Control
Choose menu “
Parental Control
”, and then you can configure the parental control in the screen
as shown in Figure 4-56. The Parental Control function can be used to control the internet
activities of the child, limit the child to access certain websites and restrict the time of surfing.
Figure 4-56
Parental Control Settings
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button and the next screen will pop-up as shown in Figure 4-57.
Page 68 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-61-
Figure 4-57
Add or Modify Parental Control Entry
¾
Parental Control -
Check
Enable
if you want this function to take effect; otherwise,
check
Disable
.
¾
MAC Address of Parental PC -
In this field, enter the MAC address of the controlling
PC, or you can make use of the
Copy To Above
button below.
¾
MAC Address of Your PC -
This field displays the MAC address of the PC that is
managing this Router. If the MAC Address of your adapter is registered, you can click
the
Copy To Above
button to fill this address to the MAC Address of Parental PC field
above.
¾
Website Description -
Description of the allowed website for the PC controlled.
¾
Schedule
-
The time period allowed for the PC controlled to access the Internet. For
detailed information, please go to “
Access Control
→
Schedule
”.
¾
Enable
- Check this option to enable a specific entry.
¾
Modify
-
Here you can edit or delete an existing entry.
2.
Enter the MAC address of the PC (e.g. 00-11-22-33-44-AA) you’d like to control in the
MAC
Address of Child PC
field, or you can choose the MAC address from the
All Address in
Current LAN
drop-down list.
3.
Give a description (e.g. Allow Google) for the website allowed to be accessed in the
Website
Description
field.
Page 69 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-62-
4.
Enter the allowed domain name of the website, either the full name or the keywords (e.g.
google) in the
Allowed Domain Name
field. Any domain name with keywords in it
(
www.google.com
,
www.google.com.cn
) will be allowed.
5.
Select from the Effective Time drop-down list the schedule (e.g. Schedule_1) you want. If
there are not suitable schedules for you, click the
Schedule
in red below to go to the
Advance Schedule Settings page and create the schedule you need.
6.
In the Status field, you can select
Enabled
or
Disabled
to enable or disable your entry.
7.
Click the
Save
button.
Click the
Enable All
button to enable all the rules in the list.
Click the
Disable All
button to disable all the rules in the list.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
For example
: If you desire that the child PC with MAC address 00-11-22-33-44-AA can access
www.google.com
on Saturday only while the parent PC with MAC address 00-11-22-33-44-BB is
without any restriction, you should follow the settings below.
1.
Click “
Parental Control
” menu on the left to enter the Parental Control Settings page. Check
Enable and enter the MAC address 00-11-22-33-44-BB in the MAC Address of Parental PC
field.
2.
Click “
Access Control
→
Schedule
” on the left to enter the Schedule Settings page. Click
Add New...
button to create a new schedule with Schedule Description is Schedule_1, Day is
Sat and Time is all day-24 hours.
3.
Click “
Parental Control
” menu on the left to go back to the Add or Modify Parental Control
Entry page:
1)
Click
Add New...
button.
2)
Enter 00-11-22-33-44-AA in the
MAC Address of Child PC
field.
3)
Enter “Allow Google” in the
Website Description
field.
4)
Enter “www.google.com” in the
Allowed Domain Name
field.
5)
Select “Schedule_1” you create just now from the
Effective Time
drop-down list.
6)
In
Status
field, select Enable.
4.
Click
Save
to complete the settings.
Then you will go back to the
Parental Control Settings
page and see the following list, as
shown in Figure 4-58.
Page 70 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-63-
Figure 4-58
Parental Control Settings
4.11 Access Control
Figure 4-59
Access Control
There are four submenus under the Access Control menu as shown in Figure 4-59:
Rule
,
Host
,
Target
and
Schedule
. Click any of them, and you will be able to configure the corresponding
function.
4.11.1 Rule
Choose menu “
Access Control
→
Rule
”, and then you can view and set Access Control rules in
the screen as shown in Figure 4-60.
Figure 4-60
Access Control Rule Management
¾
Enable Internet Access Control -
Select the check box to enable the Internet Access
Control function, so the Default Filter Policy can take effect.
¾
Rule Name -
Here displays the name of the rule and this name is unique.
¾
Host -
Here displays the host selected in the corresponding rule.
¾
Target -
Here displays the target selected in the corresponding rule.

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top