1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WR1043N
    5. /
  5. 20
Page 96 / 124 Scroll up to view Page 91 - 95
TL-WR1043ND
Wireless N Gigabit Router
-87-
4.14.2 Rules List
Choose menu “
Bandwidth Control
→
Rules List
”, and then you can view and configure the
Bandwidth Control rules in the screen below.
Figure 4-81 Bandwidth Control Rules List
¾
Description
-
This is the information about the rules such as address range.
¾
Egress bandwidth -
This field displays the max and mix upload bandwidth through the WAN
port, the default is 0.
¾
Ingress bandwidth -
This field displays the max and mix download bandwidth through the
WAN port, the default is 0.
¾
Enable -
This displays the status of the rule.
¾
Modify -
Click
Modify
to edit the rule. Click
Delete
to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1.
Click
Add New…
shown in Figure 4-81, you will see a new screen shown in Figure 4-82.
2.
Enter the information like the screen shown below.
Figure 4-82 Bandwidth Control Rule Settings
3.
Click the
Save
button.
Page 97 / 124
TL-WR1043ND
Wireless N Gigabit Router
-88-
4.15 IP & MAC Binding Setting
Figure 4-83 the IP & MAC Binding menu
There are two submenus under the IP &MAC Binding menu (shown in Figure 4-83):
Binding
Settings
and
ARP List
. Click any of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.15.1 Binding Settings
This page displays the
IP & MAC Binding Setting
table; you can operate it in accord with your
desire (shown in
Figure 4-84).
Figure 4-84 Binding Setting
¾
MAC Address
-
The MAC address of the controlled computer in the LAN.
¾
IP Address -
The assigned IP address of the controlled computer in the LAN.
¾
Bind
-
Check this option to enable ARP binding for a specific device.
¾
Modify
-
To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the
Add New…
button
or
Modify
button, and then you will go to the next page. This page is used for adding or
modifying an IP & MAC Binding entry
(shown in Figure 4-85).
Page 98 / 124
TL-WR1043ND
Wireless N Gigabit Router
-89-
Figure 4-85
IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
1.
Click the
Add New...
button as shown in Figure 4-84.
2.
Enter the MAC Address and IP Address.
3.
Select the Bind checkbox.
4.
Click the
Save
button to save it.
To modify or delete an existing entry, follow the steps below.
1.
Find the desired entry in the table.
2.
Click
Modify
or
Delete
as desired on the
Modify
column.
To find an existing entry, follow the steps below.
1.
Click the
Find
button as shown in Figure 4-84.
2.
Enter the MAC Address or IP Address.
3.
Click the
Find
button in the page as shown in Figure 4-86.
Figure 4-86
Find IP & MAC Binding Entry
Click the
Enable All
button to make all entries enabled.
Click the
Delete All
button to delete all entries.
Page 99 / 124
TL-WR1043ND
Wireless N Gigabit Router
-90-
4.15.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries (shown in Figure 4-87).
Figure 4-87
ARP List
1.
MAC Address
-
The MAC address of the controlled computer in the LAN.
2.
IP Address
-
The assigned IP address of the controlled computer in the LAN.
3.
Status
-
Indicates whether or not the MAC and IP addresses are bound.
4.
Configure
-
Load or delete an item.
¾
Load
-
Load the item to the IP & MAC Binding list.
¾
Delete
-
Delete the item.
Click the
Bind All
button to bind all the current items, available after enable.
Click the
Load All
button to load all items to the IP & MAC Binding list.
Click the
Refresh
button to refresh all items.
)
Note:
An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been
loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without
interference to the IP & MAC Binding list.
4.16 Dynamic DNS
Choose menu “
Dynamic DNS
”, and you can configure the Dynamic DNS function.
The Router offers the
DDNS
(Dynamic Domain Name System) feature, which allows the hosting
of a website, FTP server, or e-mail server with a fixed domain name (named by yourself) and a
dynamic IP address, and then your friends can connect to your server by entering your domain
Page 100 / 124
TL-WR1043ND
Wireless N Gigabit Router
-91-
name no matter what your IP address is. Before using this feature, you need to sign up for DDNS
service providers such as
www.comexe.cn
,
www.dyndns.org
, or
www.no-ip.com
. The Dynamic
DNS client service provider will give you a password or key.
4.16.1 Comexe.cn DDNS
If the dynamic DNS
Service Provider
you select is
www.comexe.cn
, the page will appear as
shown in Figure 4-88.
Figure 4-88 Comexe.cn DDNS Settings
To set up for DDNS, follow these instructions:
1.
Enter the
Domain Name
your dynamic DNS service provider gave.
2.
Enter the
User Name
for your DDNS account.
3.
Enter the
Password
for your DDNS account.
4.
Click the
Login
button to login the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to log out of the DDNS service.

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top