1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WR1043N
    5. /
  5. 19
Page 91 / 124 Scroll up to view Page 86 - 90
TL-WR1043ND
Wireless N Gigabit Router
-82-
2)
In
Domain Name
field, enter the domain name, either the full name or the keywords (for
example, google) in the blank. Any domain name with keywords in it (www.google.com,
www.google.cn) will be blocked or allowed. You can enter 4 domain names.
5.
Click the
Save
button.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA in the LAN to access
www.google.com
only, you should first follow the
settings below:
1.
Click
Add New…
button in Figure 4-70 to enter the Add or Modify an Access Target Entry
page.
2.
In
Mode
field, select Domain Name from the drop-down list.
3.
In
Target Description
field, create a unique description for the target (e.g. Target_1).
4.
In
Domain Name
field, enter www.google.com.
5.
Click
Save
to complete the settings.
Then you will go back to the Target Settings page and see the following list.
4.12.4 Schedule
Choose menu “
Access Control
→
Schedule
”, and then you can view and set a Schedule list in
the next screen as shown in Figure 4-73. The Schedule list is necessary for the Access Control
Rule.
Figure 4-73
Schedule Settings
¾
Schedule Description
- Here displays the description of the schedule and this description is
unique.
¾
Day
- Here displays the day(s) in a week.
¾
Time
- Here displays the time period in a day.
¾
Modify
- Here you can edit or delete an existing schedule.
Page 92 / 124
TL-WR1043ND
Wireless N Gigabit Router
-83-
To add a new schedule, follow the steps below:
1. Click
Add New...
button shown in Figure 4-73 and the next screen will pop-up as shown in
Figure 4-74.
2. In
Schedule Description
field, create a unique description for the schedule (e.g.
Schedule_1).
3. In
Day
field, select the day or days you need.
4. In
Time
field, you can select all day-24 hours or you may enter the Start Time and Stop Time
in the corresponding field.
5. Click
Save
to complete the settings.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
Figure 4-74
Advanced Schedule Settings
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA to access
www.google.com
only from
18:00 to 20:00
on
Saturday
and
Sunday
, you should first follow the settings below:
1) Click
Add New...
button shown in Figure 4-73 to enter the Advanced Schedule Settings page.
2) In
Schedule Description
field, create a unique description for the schedule (e.g.
Schedule_1).
3) In
Day
field, check the Select Days
radio button and then select Sat and Sun.
4) In
Time
field, enter 1800 in Start Time field and 2000 in Stop Time field.
5) Click
Save
to complete the settings.
Page 93 / 124
TL-WR1043ND
Wireless N Gigabit Router
-84-
Then you will go back to the Schedule Settings page and see the following list.
4.13 Advanced Routing
Figure 4-75
Advanced Routing
There are two submenus under the Advanced Routing menu as shown in Figure 4-75:
Static
Routing List
and
System Routing Table
.
Click any of them, and you will be able to configure the
corresponding function.
4.13.1 Static Routing List
Choose menu “
Advanced Routing
→
Static Routing List
”, and then you can configure the
static route in the next screen (shown in
Figure 4-76
). A static route is a pre-determined path that
network information must travel to reach a specific host or network.
Figure 4-76
Static Routing
To add static routing entries:
1.
Click
Add New…
shown in
Figure 4-76
, you will see the following screen.
Figure 4-77
Add or Modify a Static Route Entry
Page 94 / 124
TL-WR1043ND
Wireless N Gigabit Router
-85-
2.
Enter the following data:
¾
Destination Network
- The Destination Network is the address of the network or host that
you want to assign to a static route.
¾
Subnet Mask
-
The
Subnet Mask
determines which portion of an IP Address is the
network portion, and which portion is the host portion.
¾
Default Gateway
- This is the IP Address of the gateway device that allows for contact
between the Router and the network or host.
3.
Select
Enabled
or
Disabled
for this entry on the
Status
drop-down list.
4.
Click the
Save
button to make the entry take effect.
Other configurations for the entries:
Click the
Delete
button to delete the entry.
Click the
Enable All
button to enable all the entries.
Click the
Disable All
button to disable all the entries.
Click the
Delete All
button to delete all the entries.
Click the
Previous
button to view the information in the previous screen, click the
Next
button to
view the information in the next screen.
4.13.2 System Routing Table
Choose menu “
Advanced Routing
→
System Routing Table
”, and then you can view the
System Routing Table in the next screen (shown in Figure 4-78). System routing table views all of
the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface
will be displayed for each entry.
Figure 4-78
System Routing Table
¾
Destination Network
- The Destination Network is the address of the network or host to
which the static route is assigned.
Page 95 / 124
TL-WR1043ND
Wireless N Gigabit Router
-86-
¾
Subnet Mask
- The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
¾
Gateway
- This is the IP address of the gateway device that allows for contact between the
Router and the network or host.
¾
Interface
- This interface tells you either the Destination IP Address is on the
LAN & WLAN
(internal wired and wireless networks), or on the
WAN
(Internet).
4.14 Bandwidth Control
Figure 4-79 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 4-79:
Control
Settings
and
Rules List
. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
4.14.1 Control Settings
Choose menu “
Bandwidth Control
→
Control Settings
”, and then you can configure the
Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should
be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type
and ask your ISP for the total bandwidth of the egress and ingress.
Figure 4-80 Bandwidth Control Settings
¾
Enable Bandwidth Control -
Check this box so that the Bandwidth Control settings can take
effect.
¾
Line Type
-
Select the right type for you network connection. If you don’t know how to choose,
please ask your ISP for the information.
¾
Egress Bandwidth
- The upload speed through the WAN port
.
¾
Ingress Bandwidth -
The download speed through the WAN port.

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top