Page 116 / 143
Scroll up to view Page 111 - 115
TL-WDR3500
N600 Wireless Dual Band Router
- 106 -
4.20.2 IPv6 Setup
Figure 4-113 Enable/Disable IPv6
Enable IPv6
- Tick the checkbox to enable the IPv6 function. It’s enabled by default.
WAN Connection Type
- Choose the correct WAN connection type based on your ISP
network topology.
•
DHCPv6
- Connections which use dynamic IPv6 address assignment.
•
Static IPv6
- Connections which use static IPv6 address assignment.
•
PPPoEv6
- Connections which use PPPoEV6 that requires a user name and password.
•
Tunnel 6to4
- Connections which use 6to4 address assignment.
Different types of WAN connection require you to do different settings. Below are the detailed
explanations for the respective type.
Page 117 / 143
TL-WDR3500
N600 Wireless Dual Band Router
- 107 -
1)
DHCPv6
Figure 4-114 DHCPv6
Get non-temporary IPv6 address
- Get a non-temporary IPv6 address from the ISP.
Get IPv6 prefix delegation
- Get a temporary IPv6 address and IPv6 prefix from the ISP, the
temporary IPv6 address is set to the WAN port, and the LAN port advertise IPv6 address by
RADVD or DHCPs.
IPv6 Address
- The IPv6 address assigned by your ISP dynamically.
Click the
Renew
button to renew the IPv6 parameters from your ISP.
Click the
Release
button to release the IPv6 parameters from your ISP.
If your ISP gives you one or two DNS IPv6 addresses, select
Use the following IPv6 DNS
Servers
and enter the
Primary IPv6 DNS
and
Secondary IPv6 DNS
into the correct fields.
Otherwise, the DNS servers will be assigned from ISP dynamically.
Primary IPv6 DNS
- Enter the DNS IPv6 address in dotted-decimal notation provided by your ISP.
Secondary IPv6 DNS
- Enter another DNS IPv6 address in dotted-decimal notation provided
by your ISP.
Page 118 / 143
TL-WDR3500
N600 Wireless Dual Band Router
- 108 -
Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
Get IPv6 with Unicast DHCP
- A few ISPs' DHCP servers do not support the broadcast
applications. If you can't get the IPv6 Address normally, you can choose Unicast. (You
generally need not to check this option).
IPv6 Address Assign Type
- There are two types of assignation for IPv6 address: SLAAC
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
•
IPv6 Address Prefix
-The Prefix of IPv6 Address
DHCPv6 Server
•
Release Time
-
the length of time a network user will be allowed to keep connecting to the
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
•
IPv6 Address
- Displays the LAN IPv6 Address.
2)
Static IPv6
Figure 4-115 Static IPv6
Page 119 / 143
TL-WDR3500
N600 Wireless Dual Band Router
- 109 -
IPv6 Address
- Enter the IPv6 address in dotted-decimal notation provided by your ISP.
Default Gateway
- Enter the default gateway in dotted-decimal notation provided by your ISP.
MTU Size
- The normal MTU (Maximum Transmission Unit) value for most Ethernet networks
is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required,
and should not be done unless you are sure it is necessary for your ISP connection.
Primary DNS
- Enter the DNS IPv6 address in dotted-decimal notation provided by your ISP.
Secondary DNS
- Enter another DNS IPv6 address in dotted-decimal notation provided by
your ISP.
IPv6 Address Assign Type
- There are two types of assignation for IPv6 address: SLAAC
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol for
IPv6) Server.
SLAAC
•
IPv6 Address Prefix
-The Prefix of IPv6 Address
DHCPv6 Server
•
Release Time
-
the length of time a network user will be allowed to keep connecting to
the router with the current DHCPv6 Address. Enter the amount of time (in seconds) that
the DHCPv6 address will be leased. The time range is 1~691200 seconds. The default
value is 86400 seconds.
•
IPv6 Address
- Displays the LAN IPv6 Address.
3)
PPPoEv6
Figure 4-116 PPPoEv6
Page 120 / 143
TL-WDR3500
N600 Wireless Dual Band Router
- 110 -
User Name/Password
- Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
Get IPv6 Address Way
•
Get non-temporary IPv6 address
- Get a non-temporary IPv6 address by DHCPv6
from the ISP.
•
Get IPv6 prefix delegation
- Get a prefix delegation IPv6 address by DHCPv6 from the
ISP, and the clients in LAN create IPv6 address with the delegation.
•
Use IP address specified by ISP
- Input a static IPv6 address from the ISP
Click the
Connect
button to connect immediately.
Click the
Disconnect
button to disconnect immediately.
IPv6 Address Assign Type
- There are two types of assignation for IPv6 address: SLAAC
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
•
IPv6 Address Prefix
-The Prefix of IPv6 Address
DHCPv6 Server
•
Release Time
-
the length of time a network user will be allowed to keep connecting to the
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
•
IPv6 Address
- Displays the LAN IPv6 Address.
4)
Tunnel 6to4
Figure 4-117 Tunnel 6to4