1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WDR3500
    5. /
  5. 22
Page 106 / 143 Scroll up to view Page 101 - 105
TL-WDR3500
N600 Wireless Dual Band Router
- 96 -
4.16.1 Static Routing List
Choose menu “
Advanced Routing
→
Static Routing List
”, and then you can configure the
static route in the next screen (shown in Figure 4-96). A static route is a pre-determined path that
network information must travel to reach a specific host or network.
Figure 4-96 Static Routing
To add static routing entries:
1.
Click
Add New…
shown in Figure 4-96, you will see the following screen.
Figure 4-97 Add or Modify a Static Route Entry
2.
Enter the following data:
Destination Network
- The Destination Network is the address of the network or host that
you want to assign to a static route.
Subnet Mask
-
The
Subnet Mask
determines which portion of an IP Address is the
network portion, and which portion is the host portion.
Default Gateway
- This is the IP Address of the gateway device that allows for contact
between the Router and the network or host.
3.
Select
Enabled
or
Disabled
for this entry on the
Status
drop-down list.
4.
Click the
Save
button to make the entry take effect.
Other configurations for the entries:
Click the
Delete
button to delete the entry.
Page 107 / 143
TL-WDR3500
N600 Wireless Dual Band Router
- 97 -
Click the
Enable All
button to enable all the entries.
Click the
Disable All
button to disable all the entries.
Click the
Delete All
button to delete all the entries.
Click the
Previous
button to view the information in the previous screen, click the
Next
button to
view the information in the next screen.
4.16.2 System Routing Table
Choose menu “
Advanced Routing
→
System Routing Table
”, and then you can view the
System Routing Table in the next screen (shown in Figure 4-98). System routing table views all of
the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface
will be displayed for each entry.
Figure 4-98 System Routing Table
Destination Network
- The Destination Network is the address of the network or host to
which the static route is assigned.
Subnet Mask
- The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Gateway
- This is the IP address of the gateway device that allows for contact between the
Router and the network or host.
Interface
- This interface tells you either the Destination IP Address is on the
LAN & WLAN
(internal wired and wireless networks), or on the
WAN
(Internet).
4.17 Bandwidth Control
Figure 4-99 Bandwidth Control
Page 108 / 143
TL-WDR3500
N600 Wireless Dual Band Router
- 98 -
There are two submenus under the Bandwidth Control menu as shown in Figure 4-99:
Control
Settings
and
Rules List
. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
4.17.1 Control Settings
Choose menu “
Bandwidth Control
→
Control Settings
”, and then you can configure the
Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should
be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type
and ask your ISP for the total bandwidth of the egress and ingress.
Figure 4-100 Bandwidth Control Settings
Enable Bandwidth Control -
Check this box so that the Bandwidth Control settings can take
effect.
Line Type
-
Select the right type for you network connection. If you don’t know how to choose,
please ask your ISP for the information.
Egress Bandwidth
- The upload speed through the Internet port
.
Ingress Bandwidth -
The download speed through the Internet port.
4.17.2 Rules List
Choose menu “
Bandwidth Control
→
Rules List
”, and then you can view and configure the
Bandwidth Control rules in the screen below.
Figure 4-101 Bandwidth Control Rules List
Description
-
This is the information about the rules such as address range.
Page 109 / 143
TL-WDR3500
N600 Wireless Dual Band Router
- 99 -
Egress bandwidth -
This field displays the max and mix upload bandwidth through the
Internet port, the default is 0.
Ingress bandwidth -
This field displays the max and mix download bandwidth through the
Internet port, the default is 0.
Enable -
This displays the status of the rule.
Modify -
Click
Modify
to edit the rule. Click
Delete
to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1.
Click
Add New…
shown in Figure 4-101, you will see a new screen shown in Figure 4-102.
2.
Enter the information like the screen shown below.
Figure 4-102 Bandwidth Control Rule Settings
3.
Click the
Save
button.
4.18 IP & MAC Binding Setting
Figure 4-103 the IP & MAC Binding menu
There are two submenus under the IP &MAC Binding menu (shown in Figure 4-103):
Binding
Settings
and
ARP List
. Click any of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.18.1 Binding Settings
This page displays the
IP & MAC Binding Setting
table; you can operate it in accord with your
desire (shown in
Figure 4-104).
Page 110 / 143
TL-WDR3500
N600 Wireless Dual Band Router
- 100 -
Figure 4-104 Binding Setting
MAC Address
-
The MAC address of the controlled computer in the LAN.
IP Address -
The assigned IP address of the controlled computer in the LAN.
Bind
-
Check this option to enable ARP binding for a specific device.
Modify
-
To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the
Add New…
button
or
Modify
button, and then you will go to the next page. This page is used for adding or
modifying an IP & MAC Binding entry
(shown in Figure 4-105).
Figure 4-105 IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
1.
Click the
Add New...
button as shown in Figure 4-104.
2.
Enter the MAC Address and IP Address.
3.
Select the Bind checkbox.
4.
Click the
Save
button to save it.
To modify or delete an existing entry, follow the steps below.
1.
Find the desired entry in the table.
2.
Click
Modify
or
Delete
as desired on the
Modify
column.
To find an existing entry, follow the steps below.
1.
Click the
Find
button as shown in Figure 4-104.

Rate

4 / 5 based on 3 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top