Page 16 / 82
Scroll up to view Page 11 - 15
TL-R600VPN
SafeStream
Gigabit Broadband VPN Ro
TM
uter User Guide
10
Figure 3-7
)
Note:
If the above screen (Figure 3-7) does not prompt, it means that your web-browser may be set to a
proxy. Choose
Tools menu
→
Internet Options
→
Connections
→
LAN Settings
, in the screen
that appears, cancel the
Using Proxy checkbox
, and click
OK
to finish it.
Step 1:
Select the Quick Setup tab on the left of the main menu and the “Quick Setup” screen
will appear. Click the
Nex
t button.
Figure 3-8
Step 2:
Select the connection type to connect to the ISP and then click the
Next
button.
Figure 3-9
Page 17 / 82
SafeStream
TM
Gigabit Broadband VPN Router User Guide
TL-R600VPN
11
)
Note:
Four ways to connect to Internet are provided in Quick Setup. Please select one compatible with
your ISP. If you are given another way not listed here, refer to
Network
→
WAN
for detailed list.
Step 3:
If
Auto-Detect
is chosen, the router will detect the Internet connection type provided by
your ISP automatically.
Figure 3-10
Step 4:
If you choose
PPPoE
, you will see the screen as shown in Figure 3-11. Enter the
Username
and
Password
provided by your ISP. These fields are case sensitive. If you
have difficulty with this process, please contact your ISP.
Figure 3-11
Step 5:
If you choose
Dynamic IP
in
Figure 3-9, the router will automatically receive the IP
parameters from your ISP without needing to enter any parameters.
Step 6:
If you Choose
Static IP
, you should enter the detailed IP information in Figure 3-12.
Click the
Next
button
Figure 3-12
Page 18 / 82
SafeStream
TM
Gigabit Broadband VPN Router User Guide
TL-R600VPN
12
Step 7:
After that, you will see the next screen. Click
Finish
to complete the quick installation.
Figure 3-13
Page 19 / 82
TL-R600VPN
SafeStream
TM
Gigabit Broadband VPN Router User Guide
13
Chapter 4. Configuring the Router
It is recommended to use the “Quick Installation Guide” for first-time installation. For advanced
users, if you want to know more about this device and make use of its functions adequately, you
need to read this chapter and configure advanced settings though the Web-based Utility.
After a successful login, you can configure and manage the router. There are main menus on the
left of the Web-based Utility. Submenus will be available after you click one of the main menus.
On the center of the web-based Utility, you can configure the function. Besides this, you can refer
to the help on the right of the Web-based Utility. To apply any settings you have altered on the
page, please click the
Save
button.
4.1
Status
Choose “
Status
” menu, you can view the router's current status and configuration as shown in
Figure 4-1. All information is read-only.
Page 20 / 82
TL-R600VPN
SafeStream
Gigabit Broadband VPN Router User Guide
TM
14
Figure 4-1
¾
LAN
-
This field displays the current information for the LAN, including the “MAC address”,
“IP address” and “Subnet Mask”.
¾
WAN -
This field displays the parameters applied to the WAN port of the router, including
“MAC address”, “IP address”, “Subnet Mask”, “Default Gateway” and so on.
)
Note:
If PPPoE/L2TP/PPTP is chosen as the WAN connection type, the
Disconnect
button will be
shown here while you are accessing the Internet. You can also cut the connection by clicking the
button. If you have not connected to the Internet, a
Connect
button will be shown, and you can
then establish the connection by clicking the button.
¾
Traffic Statistics:
This field displays the traffic statistics of WAN ports.
¾
System Up Time:
This field displays the time of the router running from the time it is powered
on or is reset
.
19216811.live