SafeStream

TM

Gigabit Broadband VPN Router User Guide

TL-R600VPN

5

2.

Connect the PC(s) and all Switches/Hubs on your LAN to the LAN Ports on the router, shown

in Figure 2-3.

3.

Connect the DSL/Cable modem to the WAN port on the router, shown in Figure 2-3.

4.

Connect the AC power adapter to the AC power socket on the router, and the other end into

an electrical outlet. The router will start to work automatically.

5.

Power on your PC(s) and Cable/DSL modem.

Figure 2-3

SafeStream

TM

Gigabit Broadband VPN Router User Guide

TL-R600VPN

Chapter 3. Quick Installation Guide

This chapter describes how to configure the basic functions of your TL-R600VPN SafeStreamTM

Gigabit Broadband VPN Router. These procedures only take you a few minutes. You can access

the Internet via the router immediately after it has been successfully configured.

3.1

Configure PC

Step 1:

Click the

Start

menu on your desktop, right click

My Network Places

, and then select

Properties

(shown in Figure 3-1).

Figure 3-1

Step 2:

In the next screen, right click

Local Area Connection

(LAN), and then select

Properties

.

6

TL-R600VPN

SafeStream

Gigabit Broadband VPN Router User G

TM

uide

7

Figure 3-2

Step 3:

In the next screen, select

General

tab, highlight Internet Protocol (TCP/IP), and then

click the

Properties

button.

Figure 3-3

SafeStream

TM

Gigabit Broadband VPN Router User Guide

TL-R600VPN

8

Step 4:

Configure the IP address as shown in Figure 3-4. After that, click

OK

.

Figure 3-4

)

Note:

You can c

onfigure the PC to get an IP address automatically, select “

Obtain an IP address

automatically

” and “

Obtain DNS server address automatically

” in the screen above. For

Windows 98 OS or earlier, the PC and router may need to be restarted.

Now, you can run the Ping command in the command prompt to verify the network connection.

Please click the

Start

menu on your desktop, select

run

tab, type

cmd

in the field, and then type

ping 192.168.0.1

on the next screen, and then press

Enter

.

If the result displayed is similar to the screen below, the connection between your PC and the

Router has been established.

Figure 3-5

SafeStream

TM

Gigabit Broadband VPN Router User Guide

TL-R600VPN

9

If the result displayed is similar to the screen shown below, it means that your PC has not

connected to the Router.

Figure 3-6

You can check it follow the steps below:

)

Note:

1)

Is the connection between your PC and the Router correct?

The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be

lit.

2)

Is the TCP/IP configuration for your PC correct?

If the Router's IP address is 192.168.0.1, your PC's IP address must be within the range of

192.168.0.2 ~ 192.168.0.254, the gateway must be 192.168.0.1.

3.2

Login

Once your host PC is properly configured, please proceed as follows to use the Web-based Utility:

Start your web browser and type the private IP address of the Router in the URL field:

.

After that, you will see the screen shown below, enter the default User Name

admin

and the

default Password

admin

, and then click

OK

to access to the

Quick Setup

screen. You can follow

the steps below to complete the Quick Setup.