1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-R600VPN
    5. /
  5. 16
Page 76 / 82 Scroll up to view Page 71 - 75
TL-R600VPN
SafeStream
TM
Gigabit Broadband VPN Router User Guide
70
Appendix A: Specifications
General
Standards and Protocols
IEEE 802.3
、
IEEE 802.3u
、
IEEE 802.3ab
、
TCP/ IP
、
DHCP
、
ICMP
、
NAT
、
PPPoE
、
SNTP
、
HTTP
、
DNS
Safety & Emission
FCC
、
CE
Ports
One 10/100/1000Mbps Auto-Negotiation WAN RJ45 port
Four 10/100/1000Mbps Auto-Negotiation LAN RJ45 ports
Cabling Type
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100
Ω
STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100
Ω
STP (maximum 100m)
1000BASE-T: UTP/STP of Category 5, 5e, 6 or above (maximum
100m)
Physical and Environment
Working Temperature
0
℃
~40
℃
(32
℉
~104
℉
)
Working Humidity
10% - 90% RH, Non-condensing
Page 77 / 82
TL-R600VPN
SafeStream
TM
Gigabit Broadband VPN Router User Guide
71
Appendix B: Preventing Lightning
To avoid damage during a lightning storm and ensure a stable performance, our router has
adopted the professional lightning protection technology to prevent the lightning. However,
although these measures have been taken to protect TL-R600VPN from lightning, if the lightning
intensity exceeds a certain range, damage to the router may still happen. To protect the router
from lightning better, the following should be considered:
1)
Communication cable should be kept indoors as much as possible to reduce the possibility of
equipment damage due to lightning.
2)
If the Ethernet cable is designed for use indoors, under normal circumstances, the router
should not be used outdoors.
3)
Ensure the ground point of the socket of AC power supply is well grounded.
4)
To enhance the lightning protection capability of the power supply, a lightning arrester could
be installed at the input end of the power supply. Please read the User Manual of the arrester
carefully before installing it.
5)
As for the signal line to which the interface modules of TL-R600VPN are connected, such as
LAN’s Ethernet cable, ISDN line, telephone line, E1/T1 line, etc, a special lightning arrester
should be installed at the input end of the signal line to enhance the lightning protection
capability. Please read the User Manual of the arrester carefully before installing it.
)
Note:
The lightning arrester is not provided with our product. If needed, please self supply the arrester
and read the User Manual of the arrester carefully before installing it.
Page 78 / 82
SafeStream
TM
Gigabit Broadband VPN Router User Guide
TL-R600VPN
72
Appendix C: FAQ
1.
How do I configure the router to access Internet by ADSL users?
Step 1:
First, configure the ADSL modem in RFC1483 bridge model.
Step 2:
Connect the Ethernet cable from your ADSL modem to the WAN port on the router. The
telephone cord plugs into the Line port of the ADSL modem.
Step 3:
Login to the router, click the menu
Network
→
WAN
on the left of your browser. On the
WAN screen, select “
PPPoE/Russia PPPoE
” for the type of WAN connection. Then
enter the user name and password in the corresponding field, and finish it by clicking
Connect
.
Figure 1
Step 4:
If your ADSL lease is in “
pay-according-time
” mode, select “
Connect on Demand
” or
“
Connect Manually
” or “
Time-based Connecting
” for Internet connection mode. Type
an appropriate number for “
Max Idle Time
” or “
Period of Time
” to avoid wasting paid
time. Otherwise, you can select “
Connect Automatically
” for Internet connection mode.
Figure 2
)
Note:
1)
Sometimes the connection cannot be disconnected although you specify a time to Max
Idle Time, because some applications still visit the Internet continually in the background.
2)
If you are a Cable user, please configure the router following the above steps.
Page 79 / 82
SafeStream
TM
Gigabit Broadband VPN Router User Guide
TL-R600VPN
73
2.
How do I configure the router to access Internet by Ethernet users?
Step 1:
Login to the router, click the menu
Network
→
WAN
on the left of your browser, On the
WAN screen, select “
Dynamic IP
” for "
WAN Connection Type
", and finish it by clicking
Save
.
Step 2:
Some ISPs require that you register the MAC address of your adapter, which is
connected to your cable or DSL modem during installation. If your ISP requires MAC
register, login to the router and click the menu
Network
→
MAC Clone
. On the MAC
Clone screen, if your PC’s MAC address is a proper MAC address, click the "
Clone MAC
Address
" button and your PC’s MAC address will be filled in the "
WAN MAC Address
"
field; Or else, enter the specific MAC address into the "
WAN MAC Address
" field
manually. Then click the
Save
button. It will take effect after rebooting.
Figure 3
3.
I want to use Netmeeting, what do I need to do?
1) If you start a Netmeeting as a host, no configuration is needed but entering the invitee’s IP
address.
2) If you start a Netmeeting as an invitee, you need to configure Virtual Server or DMZ Host
first.
Method one:
Use Virtual Server
Login to the router, click the menu
Forwarding
→
Virtual Servers
. On the Virtual Server
screen, add a Virtual Server rule as shown in the next screen: configure 1720 as the “Service
Port” and enter your IP address (assuming 192.168.0.102 for an example), then click select
the status
Enabled
and click
Save
.
Page 80 / 82
TL-R600VPN
SafeStream
Gigabit Broadband VPN Router User Guide
TM
74
Figure 4
)
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
Method two: Use DMZ Host
Login to the router, click the menu
Forwarding
→
DMZ
. On the DMZ screen, select “Enable”,
and enter your IP address into the “DMZ Host IP Address” field (using 192.168.0.102 as an
example), then to click the
Save
button.
Figure 5
7.
I want to build a WEB Server on the LAN, what should I do?
Because the WEB Server port 80 will interfere with the WEB management port 80 on the router,
you must change the WEB management port number to avoid interference. And then add a WEB
Server on your LAN. You can follow the steps below to proceed.
Step 1:
To change the WEB management port number: Login to the router, click the menu
System Tools
→
Remote Management
. On the Remote Management screen, enter a
port number except 80 (such as 88) into the "
Web Management Port
" field. Click
Save
and the router will reboot.

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top