SafeStream

TM

Gigabit Broadband VPN Router User Guide

TL-R600VPN

50

¾

MPPE Encryption –

Enable or disable the MPPE Encryption. If enabled, the PPTP tunnel

will be encrypted by MPPE.

¾

IP Range Start -

Enter the start IP address to define a range for the server's IP assignment.

¾

IP Range End -

Enter the end IP address to define a range for the server's IP assignment.

4.9.2

Account Settings

Choose the menu

PPTP VPN Server

→

Account Settings

, you can configure the PPTP account

in the next screen (shown in Figure 4-45).

Figure 4-45

¾

Account -

Displays the PPTP Account.

¾

Status -

Displays the status of the PPTP Server.

To add/modify a PPTP Account rule:

Step 1:

Click

Add New…/Modify

shown in Figure 4-45, you will see a new screen shown in

Figure 4-46.

Step 2:

Enter the Account, Password and select the status.

Figure 4-46

Step 3:

Click the

Save

button.

Other configurations for the entries as shown in

Figure 4-45

.

Click the

Delete

button to delete the entry.

Click the

Enable All

button to enable all the entries.

Click the

Disable All

button to disable all the entries.

Click the

Delete All

button to delete all the entries.

SafeStream

TM

Gigabit Broadband VPN Router User Guide

TL-R600VPN

51

Click the

Previous

button to view the information in the previous screen,

click the

Next

button to

view the information in the next screen.

4.9.3

Connection Status

Choose the menu

PPTP VPN Server

→

Connection Status

, you can view the connection status

of each user in the next screen (shown in Figure 4-47).

Figure 4-47

¾

Remote IP Address –

Displays the original IP address of the remote client.

¾

PPTP IP Address –

Displays the IP address the PPTP Server assigned to the remote client.

¾

Online Time –

Displays the online time of the PPTP Server.

4.10 Static Routing

Choose menu “

Static Routing

”, you can configure the static route in the next screen (shown in

Figure 4-48). A static route is a pre-determined path that network information must travel to reach

a specific host or network.

Figure 4-48

¾

Destination IP Address

-

The “Destination IP Address” is the address of the network or host

that you want to assign to a static route.

¾

Subnet Mask

-

The “Subnet Mask” determines which portion of an IP address is the network

portion, and which portion is the host portion.

¾

Default Gateway

-

This is the IP address of the gateway device that allows for contact

between the router and the network or host.

¾

Status

-

This field displays the status,

Enabled

means the rule is effective,

Disabled

means

the rule is ineffective.

SafeStream

TM

Gigabit Broadband VPN Router User Guide

TL-R600VPN

52

To add/modify a static routing entry:

Step 1:

Click

Add New…

/

Modify

shown in Figure 4-48, you will see a new screen shown in

Figure 4-49.

Step 2:

Enter the appropriate Destination IP Address, Subnet Mask and Default Gateway, and

then select the status.

Figure 4-49

Step 3:

Click

Save

to make the entry take effect.

)

Note:

If you want to add more than one static route, please go to

step 1

to continue.

Other configurations for the entries as shown in

Figure 4-48

.

Click the

Delete

button to delete the entry.

Click the

Enable All

button to enable all the entries.

Click the

Disable All

button to disable all the entries.

Click the

Delete All

button to delete all the entries.

Click the

Previous

button to view the information in the previous screen,

click the

Next

button to

view the information in the next screen.

4.11 Bandwidth Control

Choose menu “

Bandwidth Control

”, the next submenus are shown below.

Figure 4-50

Click any of them, and you will be able to configure the corresponding function. The detailed

explanations for each submenu are provided below.

4.11.1 Control Settings

Choose menu “

Control Settings

”, you can configure the Egress Bandwidth and Ingress Band-

width in the next screen (shown in Figure 4-51).

TL-R600VPN

SafeStream

Gigabit Broadband VPN Router User Guide

TM

53

Figure 4-51

¾

Enable Bandwidth Control

-

Enable or disable the Bandwidth Control.

¾

Line Type

-

Select the Line Type of the WAN port.

¾

Egress/Ingress Bandwidth –

Enter the Egress and Ingress Bandwidth through the WAN

port.

4.11.2 Rule List

Figure 4-52

¾

Description

-

This is the information about the rules such as address range.

¾

Egress bandwidth -

This field displays the max and mix upload bandwidth through the WAN

port, the default is 0.

¾

Ingress bandwidth -

This field displays the max and mix download bandwidth through the

WAN port, the default is 0.

¾

Enable -

This displays the status of the rule.

¾

Modify -

Click “

Modify

” to edit the rule, click “

Delete

” to delete the rule.

To add/modify a Bandwidth Control rule:

Step 1:

Click

Add New

…

Modify

shown in Figure 4-52, you will see a new screen shown in

Figure 4-53

Step 2:

Enter the information like the screen shown below.

TL-R600VPN

SafeStream

Gigabit Broadband VPN Router User Guide

TM

54

Figure 4-53

Step 3:

Click the

Save

button.

Other configurations for the entries as shown in Figure 4-52:

Click the

Delete All

button to delete all the entries.

Click the

Previous

button to view the information in the previous screen,

click the

Next

button to

view the information in the next screen.

4.12 IP & MAC Binding

Choose menu “

IP & MAC Binding

”, the next submenus are shown below.

Figure 4-54

Click any of them, and you will be able to configure the corresponding function. The detailed

explanations for each submenu are provided below.

4.12.1 Binding Setting

Choose menu “

IP & MAC Binding

→

Binding Setting

”, you can view and add IP & MAC binding

entries in the next screen (shown in Figure 4-55).

Figure 4-55