-12-

Figure 3-7

Note:

If the above screen (Figure 3-7) does not prompt, it means that your web-browser may be set to a

proxy. Choose

Tools menu

→

Internet Options

→

Connections

→

LAN Settings

, in the screen that

appears, cancel the

Using Proxy checkbox

, and click

OK

to finish it.

After a successful login, the “Quick Setup” screen will pop up as the Figure 3-8 shown. If it does not

prompt, you can click the

Quick Setup

on the left of the main menu. Then click <Next>.

Figure 3-8

Quick Setup

Select the total number of WAN ports you prefer to use as the Figure 3-9 shown. Then click <Next> to

load the

WAN Port

screen.

-13-

Figure 3-9

WAN Mode

Select the WAN port you want to use as the Figure 3-10 shown, and then click <Next> to load the

WAN Connection Type

screen.

Figure 3-10 WAN Port

Select the connection type provided by your ISP as the Figure 3-11 shown. Three popular types are

provided here. For other connection types, please refer to the

4.3.1 WAN

.

-14-

Figure 3-11 WAN Connection Type

1)

If you choose

PPPoE

, you will see the screen as the Figure 3-12 shown. Enter the

Account

Name

and

Password

provided by your ISP (Internet Service Provider).

Figure 3-12 WAN Connection Type - PPPoE

Click <Next> to dial up, and the process will take a few minutes. The process of configuring the

network parameters is shown as Figure 3-14. If you close the screen during the process, the

configuration will still be continued in the background.

These fields are case sensitive. If you have difficulty in this process, please contact your ISP.

-15-

Figure 3-13 WAN Connection Type – PPPoE Connecting

2)

If your ISP assigns the IP address automatically, please choose the

Dynamic IP

connection type

to obtain the parameters for WAN port automatically. The process for obtain the parameter may

take a few minutes as Figure 3-14 shown. If you close the screen during the process, the

configuration will still be continued in the background.

Figure 3-14 WAN Connection Type - Dynamic IP

3)

If you choose

Static IP

, you should enter the detailed IP information provided by your ISP in

Figure 3-15.

-16-

Figure 3-15 WAN Connection Type - Static IP

Then click <Next>. The process for configuring the network parameters is shown as Figure 3-16.

If you close the screen during the process, the configuration will still be continued in the

background.

If you have difficulty in this process, please contact your ISP.

Figure 3-16 WAN Connection Type - Static IP Connecting

After that, you will see the next screen. Click <Finish> to complete the quick installation or click

<Continue> to configure other WAN ports.