TL-MR3420

3G/3.75G Wireless N Router

-19-

4.3

Quick Setup

Please refer to

Section 3.2: "Quick Installation Guide."

4.4

QSS

This section will guide you add a new wireless device to an existing network quickly by

QSS

(Quick Secure Setup)

function.

a).

Choose menu “

QSS

”, you will see the next screen (shown in

Figure 4-2

).

Figure 4-2

QSS

¾

QSS Status -

Enable or disable the QSS function here.

¾

Current PIN -

The current value of the Router's PIN displayed here. The default PIN of the

Router can be found in the label or User Guide.

¾

Restore PIN -

Restore the PIN of the Router to its default.

¾

Gen New PIN -

Click this button, and then you can get a new random value for the Router's

PIN. You can ensure the network security by generating a new PIN.

¾

Add device -

You can add the new device to the existing network manually by clicking this

button.

b).

To add a new device:

If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless

connection between wireless adapter and Router using either Push Button Configuration (PBC)

method or PIN method.

)

Note:

To build a successful connection by QSS, you should also do the corresponding configuration of

the new device for QSS function meanwhile.

For the configuration of the new device, here takes the Wireless Adapter of our company for

example.

I.

By PBC

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)

TL-MR3420

3G/3.75G Wireless N Router

-20-

method, you can add it to the network by PBC with the following two methods.

Method One:

Step 1:

Press the QSS button on the front panel of the Router.

Step 2:

Press and hold the QSS button of the adapter directly for 2 or 3 seconds.

Step 3: Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

The QSS Configuration Screen of Wireless Adapter

Method Two:

Step 1: Press the QSS button on the front panel of the Router.

Step 2: For the configuration of the wireless adapter, please choose

Push the button on my

access point

in the

configuration utility of the QSS as below, and click

Next

.

TL-MR3420

3G/3.75G Wireless N Router

-21-

The QSS Configuration Screen of Wireless Adapter

Step 3: Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

The QSS Configuration Screen of Wireless Adapter

Method Three:

Step 1:

Keep the default QSS Status as

Enabled

and click the

Add device

button in

Figure 4-2

,

then the following screen will appear.

TL-MR3420

3G/3.75G Wireless N Router

-22-

Figure 4-3

Add A New Device

Step 2:

Choose

Press the button of the new device in two minutes

and click

Connect

.

Step 3:

For the configuration of the wireless adapter, please choose

Push the button on my

access point

in the

configuration utility of the QSS as below, and click

Next

.

The QSS Configuration Screen of Wireless Adapter

Step 4:

Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

TL-MR3420

3G/3.75G Wireless N Router

-23-

The QSS Configuration Screen of Wireless Adapter

II. By PIN

If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the

network by PIN with the following two methods.

Method One:

Enter the PIN into my Router

Step 1: Keep the default QSS Status as

Enabled

and click the

Add device

button in

Figure 4-2

,

then the following screen will appear.

Step 2: Choose

Enter the new device's PIN

and enter the PIN code of the wireless adapter in

the field behind

PIN

in the above figure. Then click

Connect.

)

Note:

The PIN code of the adapter is always displayed on the QSS configuration screen

Step 3: For the configuration of the wireless adapter, please choose

Enter a PIN into my access

point or a registrar

in the

configuration utility of the QSS as below, and click

Next.