TL-MR3220

3G/4G Wireless N Router User Guide

-17-

Step 3: Wait for a while until the next screen appears. Click

Finish

to complete the WPS

configuration.

The WPS Configuration Screen of wireless adapter

Method Two:

Step 1: Press the

WPS/RESET

button on the rear panel of the Router.

Step 2: For the configuration of the wireless adapter, please choose

Push the button on my

access point

in the

configuration utility of the WPS as below, and click

Next

.

TL-MR3220

3G/4G Wireless N Router User Guide

-18-

The WPS Configuration Screen of wireless adapter

Step 3: Wait for a while until the next screen appears. Click

Finish

to complete the WPS

configuration.

The WPS Configuration Screen of wireless adapter

Method Three:

Step 1:

Keep the default WPS Status as

Enabled

and click the

Add device

button in

Figure 4-2

,

then the following screen will appear.

TL-MR3220

3G/4G Wireless N Router User Guide

-19-

Figure 4-3

Add A New Device

Step 2:

Choose

Press the button of the new device in two minutes

and click

Connect

.

Step 3:

For the configuration of the wireless adapter, please choose

Push the button on my

access point

in the

configuration utility of the WPS as below, and click

Next

.

The WPS Configuration Screen of Wireless adapter

Step 4:

Wait for a while until the next screen appears. Click

Finish

to complete the WPS

configuration.

TL-MR3220

3G/4G Wireless N Router User Guide

-20-

The WPS Configuration Screen of Wireless adapter

II. By PIN

If the wireless adapter supports Wi-Fi Protected Setup or Quick Secure Setup and the PIN

method, you can add it to the network by PIN with the following two methods.

Method One: Enter the PIN into my Router

Step 1: Keep the default WPS Status as

Enabled

and click the

Add device

button in

Figure 4-2

,

then the following screen will appear.

Step 2: Choose

Enter the new device's PIN

and enter the PIN code of the wireless adapter in

the field behind

PIN

in the above figure. Then click

Connect.

)

Note:

The PIN code of the wireless adapter is always displayed on the WPS or QSS configuration

screen.

Step 3: For the configuration of the wireless adapter, please choose

Enter a PIN into my

access point or a registrar

in the

configuration utility of the WPS as below, and click

Next

.

TL-MR3220

3G/4G Wireless N Router User Guide

-21-

The WPS Configuration Screen of wireless adapter

)

Note:

In this example, the default PIN code of this adapter is 16952898 as the above figure shown.

Method Two: Enter the PIN from my Router

Step 1: Get the Current PIN code of the Router in

Figure 4-2

(each Router has its unique PIN

code. Here takes the PIN code 12345670 of this Router for example).

Step 2: For the configuration of the wireless adapter, please choose

Enter a PIN from my

access point

in the

configuration utility of the WPS as below, and enter the PIN code

of the Router into the field behind

Access Point PIN

. Then click

Next.

The WPS Configuration Screen of Wireless adapter

)

Note:

The default PIN code of the Router can be found in its label or the WPS configuration screen as

Figure 4-2.