19216811.liveTD-W9970
300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
10
You can check it following the steps below:
1)
Is the connection between your PC and the modem router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2)
Is the TCP/IP configuration for your PC correct?
If the modem router's IP address is 192.168.1.1, your PC's IP address must be within the
range of 192.168.1.2 ~ 192.168.1.254.
3.2 Quick Installation Guide
With a Web-based management page, it is easy to configure and manage the TD-W9970
300Mbps Wireless N USB VDSL/ADSL Modem Router. The Web-based management page can
be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet
Explorer, Mozilla Firefox or Apple Safari.
1.
To access the configuration utility, open a web-browser and type the default address
http://tplinkmodem.net/
in the address field of the browser.
Figure 3-3
After a moment, a login window will appear, similar to the Figure 3-4. Enter
admin
for the
User Name and Password, both in lower case letters. Then click the
Login
button or press the
Enter
key.
Figure 3-4
Note:
1)
Do not mix up the user name and password with your DSL account user name and password
which are needed for PPP connections.
2)
If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
Go to
Tools
menu
→
Internet Options
→
Connections
→
LAN Settings
, in the screen that
appears, cancel the Using Proxy checkbox, and click
OK
to finish it.
2.
After your successful login, you will see the Login screen as shown in Figure 3-5. Click
Quick
Setup
menu to access
Quick Setup
Wizard
and then click
Next
.