1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-W8960Nv1.3.6
    5. /
  5. 20
Page 96 / 122 Scroll up to view Page 91 - 95
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast
messages. The default value is 1.
¾
Beacon Interval:
Enter a value between 20-1000 milliseconds. The Beacon Interval value
indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router
to synchronize the wireless network. The default value is 100.
¾
Transmit Power:
This option will allow you to configure the wireless transmit power. High
transmit power will extend the wireless signal range of the device and make the signal
transmit more legible. Low transmit power with the smaller wireless signal range that will
decrease the probability of interrupt by other Wi-Fi device.
¾
WMM (Wi-Fi Multimedia):
This function can guarantee the packets with high-priority
messages being transmitted preferentially. It is strongly recommended.
4.5.6 Station info
Choose “
Wireless
”
Æ
”
Station Info
”, you will see the screen of
Wireless--Authenticated
Stations
setting shown as below.
Figure 4-96
This page shows authenticated wireless stations and their status.
¾
MAC
: Displays the connected wireless station's MAC address.
¾
Associated
: Displays whether the wireless station has associated with the access point.
¾
Authorized
: Displays the information of Authentication.
¾
SSID
: Displays the connected wireless station's SSID.
¾
Interface
: Displays the connected wireless station's Interface mode.
4.6 Diagnostics
Choose “
Diagnostics
”, you will see the Diagnostics screen. This section describes the result of
the test for the ENET (Ethernet) Connection, Wireless Connection and ADSL Synchronization.
You can refer to the
Help
menu to get more information about the corresponding test.
89
Page 97 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-97
4.7 Management
Choose “
Management
”, there are eight submenus under the main menu. They are
Settings
,
System Log
,
SNMP Agent
,
TR-069 Client
,
Access Control
,
Update Software
and
Reboot
.
Click any of them, and you will be able to configure the corresponding function.
4.7.1 Settings
This section provides three important functions for managing the Router; they are
Backup
,
Update
and
Restore Default
(shown in
Figure 4-98). The detailed manipulations are described
below.
90
Page 98 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-98
4.7.1.1 Export
Choose “
Management
”
Æ
“
Settings
”
Æ
“
Export
”, you can see the
Export
screen, this screen
(shown in Figure 4-99) allows you to save the current configuration of the Router as a backup file.
Figure 4-99
To back up the Router’s current settings:
1.
Click the
Export Settings
button on the preceding screen (pop-up Figure 4-99), the
following screen will then appear (shown in Figure 4-100).
Figure 4-100
2.
Click the
Save
button, and save the file as the appointed file (shown in Figure 4-101).
91
Page 99 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
TD-W8960N
Figure 4-101
4.7.1.2 Import
Choose “
Management
”
Æ
“
Settings
”
Æ
“
Import
”, you can see the
Import
screen, this screen
(shown in Figure 4-102) allows you to update the Router’s settings.
Figure 4-102
To update the Router’s settings:
1.
Click the
Browse
button to locate the update file for the device, and you can also enter the
exact path to the Setting file in the text box.
2.
After you have selected the file for updating the settings, click the
Import Settings
button.
)
Note:
The Router will reboot upon completion. This process will take a while, don’t turn off the Router or
press the
Reset
button while processing.
92
Page 100 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
4.7.1.3 Restore Default
Choose “
Management
”
Æ
“
Settings
”
Æ
“
Restore Default
”, you can see the
Restore Default
screen, this screen (shown in Figure 4-103) allows you to restore the Router’s configuration to the
factory defaults on the screen.
Figure 4-103
¾
Restore Default Settings:
Click this button to restore the Router’s configuration to the factory
defaults, and then follow the on-screen instructions to complete it.
¾
Account and Password:
The default
account name
and its
password
are both admin.
¾
The default
IP Address:
192.168.1.1.
¾
The default
Subnet Mask:
255.255.255.0.
4.7.2 System Log
Choose “
Management
”
Æ
“
System Log
”, you can see the
System Log
screen, this screen
(shown in Figure 4-104) allows you to view the system log and configure the system log options.
Figure 4-104
To View the System Log:
Click the
View System Log
button, you will see the screen (shown in Figure 4-105) which displays
the Router’s recent logs.
93

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top