1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-W8960NB
    5. /
  5. 4
Page 16 / 110 Scroll up to view Page 11 - 15
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
¾
If the result displayed is similar to the Figure 3-2, it means the connection between your PC
and the Router is failed.
Figure 3-2
Failure result of Ping command
Please check the connection following these steps:
1.
Is the connection between your PC and the Router correct?
)
Note:
The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter
should be lit.
2.
Is the TCP/IP configuration for your PC correct?
)
Note:
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2 Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the TD-W8960NB 300Mbps Wireless
N ADSL2+ Modem Router. The Web-based utility can be used on any Windows, Macintosh or
UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
1.
To access the configuration utility, open a web-browser and type in the default address
http://192.168.1.1 in the address field of the browser.
Figure 3-3
After a moment, a login window will appear, similar to the Figure 3-4. Enter
admin
for the
User Name and Password, both in lower case letters. Then click the
OK
button or press the
Enter
key.
9
Page 17 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-4
)
Note:
1)
Do not mix up the user name and password with your ADSL account user name and password
which are needed for PPP connections.
2)
If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
Go to
Tools
menu
→
Internet Options
→
Connections
→
LAN Settings
, in the screen that
appears, cancel the Using Proxy checkbox, and click
OK
to finish it.
2.
After your successful login, you will see the Login screen as shown in Figure 3-5. Click
Quick
Setup
menu to access
Quick Setup
Wizard
.
Figure 3-5
3.
Change the VPI or VCI values which are used to define a unique path for your connection.
If
you have been given specific settings for this to configuration, type in the correct
values assigned by your ISP.
Here we select PPPoE WAN Link Type for example, enter the
Username
and
Password
given by your ISP, and then click
Next
.
10
Page 18 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-6
)
Note:
The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface.
4.
On the
Wireless Configurations
screen, we use the default SSID, select Network
Authentication (take
WPA-PSK/WPA2-PSK
for example), set a Pre-Shared Key, and then
click
Save
to continue.
11
Page 19 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-7
)
Note:
All the existed
ATM
&
WAN
service will be cleared after clicking the
Save
button on this Quick
Setup page.
5.
You will see the
Finish
screen below, click
Reboot
to save these settings.
Figure 3-8
6.
Now, your ADSL Modem Router has been configured and is rebooting. Please do not power
off the Router while it’s rebooting.
12
Page 20 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-9
7.
You will see the current configuration has been added to Layer2 Interface list (
4.4.1
Layer2
Interface
) shown in Figure 3-10 and WAN Service list (
4.4.2
WAN Service
) shown in Figure
3-11.
Figure 3-10
Figure 3-11
)
Note:
More detailed configurations please refer to
4.4.1
Layer2 Interface
and
4.4.2
WAN Service
.
13

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top