Page 101 / 110
Scroll up to view Page 96 - 100
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
4.
I want to build a WEB Server on the LAN, what should I do?
Log in to the Router, click the “
Advanced Setup
-
NAT
” menu on the left of your browser, and click
the "
Virtual Servers
" submenu. On the "
Virtual Servers
" page, click
Add New
, then on the “
Add
or Modify a Virtual Server
” page, enter use “80” as service port, and your IP address next to the
“
Server IP Address
”, assuming
192.168.1.188 for an example, and remember to click the
Save/Apply
button.
)
Note:
Because the WEB Server port 80 will interfere with the WEB management port 80 on the Router,
you will be prompt to change the WEB management port number to avoid interference.
5.
The wireless stations cannot connect to the Router.
1) Make sure the "
Enable Wireless Router Radio
" is checked.
2)
Make sure that the wireless stations' SSID accord with the Router's SSID.
3)
Make sure the wireless stations have right KEY for encryption when the Router is encrypted.
4)
If the wireless connection is ready, but you can’t access the Router, check the IP Address of
your wireless stations.
94
Page 102 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Appendix B: Configuring the PC
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP.
First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary.
1.
Configure TCP/IP component
1)
On the Windows taskbar, click the
Start
button, and then click
Control Panel
.
2)
Click the
Network and Internet Connections
icon, and then click on the
Network
Connections
tab in the appearing window.
3)
Right click the icon that showed below, select Properties on the prompt page.
4)
In the prompt page that showed below, double click on the
Internet Protocol (TCP/IP)
.
95
Page 103 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
5)
The following
TCP/IP Properties
window will display and the
IP Address
tab is open on
this window by default.
Now you have two ways to configure the
TCP/IP
protocol below:
¾
Setting IP address automatically
Select
Obtain an IP address automatically
, Choose
Obtain DNS server automatically
, as
shown in the Figure below:
96
Page 104 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
)
Note:
For Windows 98 OS or before, the PC and Router may need to be restarted.
¾
Setting IP address manually
1
Select
Use the following IP address
radio button. And the following items available.
2
If the Router's LAN IP address is
192.168.1.1, specify the
IP address
as 192.168.1.x (x is
from 2 to 254), and the
Subnet mask
as 255.255.255.0.
3
Type the Router’s LAN IP address (the default IP is
192.168.1.1) into the
Default gateway
field.
4
Select
Use the following DNS server addresses
. In the
Preferred
DNS Server
field you
can enter the same value as the
Default gateway
or type the local DNS server IP address.
97
Page 105 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Now:
Click
OK
to keep your settings.
98
19216811.live