Page 26 / 94
Scroll up to view Page 21 - 25
TD-W8951NB
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
18
Figure 4-3
The Router can keep logs of all traffic. You can query the logs to find what happened to the
Router.
Click the
CLEAR LOG
button to clear the logs.
Click the
SAVE LOG
button to save the logs.
4.1.3 Statistics
Choose “
Status
→
Statistics
” menu, and you will be able to view the network traffic over Ethernet,
ADSL and WLAN.
Page 27 / 94
TD-W8951NB
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
19
Figure 4-4
¾
Interface:
You can select
Ethernet
,
ADSL
and
WLAN
to view the corresponding network
traffic over different ports.
¾
Select
Ethernet
, and you
will
see the statistics table as below.
Statistics Table:
Transmit Frames
The frames transmitted over the Ethernet port.
Transmit Multicast Frames
The multicast frames transmitted over the Ethernet
port.
Transmit total Bytes
The total bytes transmitted over the Ethernet port.
Transmit Collision
The collision occurred over the Ethernet port when
data is being transmitted.
Transmit
Statistics
Transmit Error Frames
The error frames over the Ethernet port when data is
being transmitted.
Receive Frames
The frames received over the Ethernet port.
Receive Multicast Frames
The multicast frames received over the Ethernet port.
Receive total Bytes
The total bytes received over the Ethernet port.
Receive CRC Errors
The CRC errors occurred over the Ethernet port when
data is being received.
Receive
Statistics
Receive Under-size Frames
The Under-size frames received over the Ethernet
port.
Page 28 / 94
TD-W8951NB
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
20
¾
Select
ADSL
, and you
will
see the statistics table as below.
Statistics Table:
Transmit total PDUs
The total PDUs transmitted over the ADSL port.
Transmit
Statistics
Transmit total Error Counts
The total errors occurred over the ADSL port when data
is being transmitted.
Receive total PDUs
The total PDUs transmitted over the ADSL port.
Receive
Statistics
Receive total Error Counts
The total errors occurred over the ADSL port when data
is being received.
¾
Select
WLAN
, and you
will
see the statistics table as below.
Statistics Table:
Tx Frames Count
The frames transmitted over the WLAN when wireless data is
being transmitted.
Tx Errors Count
The errors occurred over the WLAN when wireless data is being
transmitted.
Transmit
Statistics
Tx Drops Count
The drops occurred over the WLAN when wireless data is being
transmitted.
Rx Frames Count
The frames received over the WLAN when wireless data is being
transmitted.
Rx Errors Count
The errors occurred over the WLAN when wireless data is being
received.
Receive
Statistics
Rx Drops Count
The drops occurred over the WLAN when wireless data is being
received.
Click the
REFRESH
button to refresh immediately.
4.2
Quick Start
Please refer to
3.2 Login
.
Page 29 / 94
TD-W8951NB
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
21
4.3
Interface Setup
Choose “
Interface Setup
”, you can see the next submenus:
Internet
,
LAN
and
Wireless
.
Figure 4-5
Click any of them, and you will be able to configure the corresponding function.
4.3.1 Internet
Choose “
Interface Setup
→
Internet
” menu, you can configure the parameters for WAN ports in
the next screen (shown in Figure 4-6).
Page 30 / 94
TD-W8951NB
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
22
Figure 4-6
¾
ATM VC:
ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path
Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup
8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You
need to activate the VC to take effect. For PVCs management, you can use ATM QoS to
setup each PVC traffic line's priority.
19216811.live