1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-W8151N
    5. /
  5. 12
Page 56 / 69 Scroll up to view Page 51 - 55
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
49
Then you can configure the specific rule for the example.
Step 2:
Select the
IP/MAC Filter Set Index
and
IP/MAC Filter Rule Index
for the rule, then
select the Interface “PVC0”, and select the Direction “Outgoing” for the first rule.
)
Note:
If you want to make the rule take effect, please select
Yes
to active the rule.
Step 3:
Enter the “MAC Address” and select the Unmatched rule as “Next”.
Step 4:
Finally, click the
SAVE
to save the entry.
Step 5:
Go to Step 2 to configure the next rule: Block the PC with MAC address
00-0A-EB-00-07-5F to access the Internet.
)
Note:
After you complete the MAC filter rules for the example, the Filter list will show as follows. You can
enter the
IP / MAC Filter Set Index
to view the information about the rule.
Other operations for the entries as shown in Figure 4-37:
Select the
IP / MAC Filter Set Index
and
IP/MAC Filter Rule Index
to view or modify the entry.
Select the
IP / MAC Filter Set Index
and
IP/MAC Filter Rule Index
to locate the specific rule, and
then click the
DELETE
button to delete the entry.
4.5.2.3 Application Filter
Select
Application Filter
as the Filter type (shown in Figure 4-39), and then you can configure the
filter rules based on application.
Page 57 / 69
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
50
Figure 4-39
¾
Filter Type Selection:
Select the Application Filter for the next configuration.
¾
Application Filter:
Activate or deactivate the function.
¾
ICQ & MSN & YMSG & Real Audio/Video:
Select
Allow
or
Deny
for these applications.
If
you select Allow,
the Router will accept the application; if you select Deny, the Router will
forbid the application.
4.5.2.4 URL
Select
Application Filter
as the Filter type (shown in Figure 4-40), and then you can configure the
filter rules based on URL.
Page 58 / 69
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
51
Figure 4-40
¾
Filter Type Selection:
Select the URL Filter for the next configuration.
¾
Active:
Select “Yes” to make the rule to take effect.
¾
URL Index:
Select the index for the URL Filter entry.
¾
URL:
Enter the URL for this URL Filter.
¾
URL Filter Listing:
This displays the information about the URL Filter rules.
To add a URL filter entry:
For example:
If you want to forbid the user to access the website:
www.yahoo.com
. Presume the
rule is aimed at the interface PVC0, and its index is “1”.
Step 1:
Select the “URL Filter” as the Filer Type Selection (show in Figure 4-40).
Step 2:
Select the Index for the rule, and then enter the website in the URL field.
Step 3:
Finally, Select
Yes
to active the rule, and then click the
SAVE
to save the entry.
Other operations for the entries as shown in Figure 4-37:
Select the
URL Index
to view or modify the entry.
Select the
URL Index
to locate the specific rule, and then click the
DELETE
button to delete the
entry.
4.5.3 SNMP
Choose “
Access Management
→
SNMP
”, you can see the SNMP screen. The Simple Network
Page 59 / 69
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
52
Management Protocol (SNMP) is used for exchanging information between network devices.
Figure 4-41
¾
Get Community:
Set the password for the incoming Get and Get next requests from the
management station.
¾
Set Community:
Set the password for incoming Set requests from the management station.
4.5.4 UPnP
Choose “
Access Management
→
UPnP
”, you can configure the UPnP in the screen (shown in
Figure 4-42).
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join
a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer in
use. UPnP broadcasts are only allowed on the LAN.
Figure 4-42
¾
UPnP:
Activate or Deactivate the UPnP function. Only when the function is activated, can the
UPnP take effect.
¾
Auto-Configure:
If you activate the function, then the UPnP network devices can
automatically configure network addressing, announce their presence in the network to other
UPnP devices and enable exchange of simple product and service descriptions.
4.5.5 DDNS
Choose “
Access Management
→
DDNS
”, you can configure the DDNS function in the screen
(shown in Figure 4-43).
The Router offers a Dynamic Domain Name System (
DDNS
) feature. The feature lets you use a
static host name with a dynamic IP address. User should type the host name, user name and
password assigned to your ADSL Router by your Dynamic DNS provider. User also can decide to
turn on DYNDNS Wildcard or not.
Page 60 / 69
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
53
Figure 4-43
¾
Dynamic DNS:
Activate the DDNS function or not.
¾
Service Provider:
This field displays the service provider of DDNS.
¾
My Host Name:
Enter your host name here.
¾
E-mail Address:
Enter your E-mail address here.
¾
Username & Password:
Type the “User Name” and “Password” for your DDNS account.
¾
Wildcard support:
Select the option to use Wildcard function
4.5.6 CWMP
Choose “
Access Management
→
CWMP
”, you can configure the CWMP function in the screen
(shown in Figure 4-44).
The Router offers CWMP feature. The function supports TR-069 protocol which collects
information, diagnoses the devices and configures the devices automatically via ACS
(Auto-Configuration Server).

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top