1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-VG3631
    5. /
  5. 25
Page 121 / 129 Scroll up to view Page 116 - 120
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
112
2) Insert the provided Resource CD into CD-ROM drive of your computer.
3) Please select your product model and click
Start Setup
.
4) Then the configuration wizard will pop up and show you how to connect your devices. After that,
the
Easy Setup Assistant
will start. Click
NEXT
, and then follow the step-by-step instructions.
Page 122 / 129
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
113
5) When it comes to
Configure USB Voice Mail
page, check boxes before
Configure USB
Voice Mail
and
Send Files to USB Disk
. Then click
NEXT
to continue.
6) Follow the step-by-step instructions until you comes to the finish screen. Click
FINISH
to close
this wizard.
Page 123 / 129
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
114
7) The configure files can be found in your USB device which means you have successfully
configured the USB device for USB Voice Mail function.
Page 124 / 129
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
115
Appendix C: Telephony Features
This section introduces what the following features are used for.
Call Holding
This feature allows you to put a call on hold, in which case the call is not ended but no verbal
communication is available.
To put a call on hold, press the
FLASH
button. To return to the original call, press the
FLASH
button again.
Call Transfer
This feature allows you to redirect the current call to another phone by using the
FLASH
button
and dialing the destination number.
To transfer a call, please follow the steps below:
1. Press
FLASH
button to put the current call on hold.
2. Dial the destination number.
Note: To quit the transfer, press the
FLASH
button again to return to the original call before
hearing the ringback tone.
3.
Hang up when hearing the ringback tone or wait for the newly called party to answer and then
hang up. Now the call is successfully transferred.
Call Waiting
With this feature enabled, if a calling party places a call to you while you are busy, you are able to
suspend the current call and switch to the new incoming call.
To switch to the new incoming call, press
FLASH
followed by the number 2. The first call will be
automatically put on hold. You can switch between the two calls by pressing
FLASH
followed by
the number 2.
USB Voice Mail
With this feature enabled, the caller will be prompted to leave a voice message upon the call or
when there is no response for a certain time.
Call Forwarding
This feature allows an incoming call to be redirected to a specified party. There are three call
forwarding features, including Call Forwarding Unconditionally, Call Forwarding on Busy and Call
Forwarding on No Answer.
9
With Call Forwarding Unconditionally enabled, no matter whether the called party is busy or
not, the incoming call will be redirected to the specified party.
9
With Call Forwarding on Busy enabled, the incoming call will be redirected to the specified
party when the called party is busy.
9
With Call Forwarding on No Answer enabled, the incoming call will be redirected to the
specified party when there is no response for a certain time.
Anonymous Calling
This feature allows you to make a call without your phone number or ID being displayed on the
called party's phone.
Page 125 / 129
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
116
Anonymous Call Blocking
With this feature enabled, all anonymous calls will be blocked.
Speed Dial
This feature allows you to create short numbers for your frequently used telephone numbers to
make your dialing more convenient. You just need to press one or two digits and the key # instead
of the original phone number to make a call.
Warm Line
With this feature enabled, a call will be automatically directed to a specified party without taking
any additional action when the phone goes off-hook for a certain time. To use this feature, you
need to set warm line numbers first on the web management page.
DND (Do Not Disturb)
With this feature enabled, all the incoming calls will be blocked and the caller will hear the busy
tone.
Three-way Call
This feature allows three people to communicate at the same time.
To set up a three-way call, please follow the steps below:
1. Press the
FLASH
button to put the first call on hold.
2. Dial the destination number.
3. Wait for the third party to answer and then press
FLASH
followed by the number 3. Now
the three-way call is successfully set up.
4. To drop yourself out of the call, simply hang up.
A three-way call can also be set up during a call with Call Waiting enabled. When hearing the call
waiting tone during a call, press
FLASH
followed by the number 3.
Note: The call will end if the initiator of the three-way call hangs up. However, the call will not end if
anyone of the other two parties hangs up. The left two parties remain connected to each other.

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top