1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-VG3631
    5. /
  5. 16
Page 76 / 129 Scroll up to view Page 71 - 75
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
67
in Black List and 2224 in White List, with Black List mode enabled, incoming call number 2224510
will be allowed.
4.7.8 USB Voice Mail
Choose “
Voice
”
Æ
“
USB Voice Mail
“, you will see the screen as shown in Figure 4-54. USB Voice
mail is used to record voice messages when the call is not answered. To use this function, please
make sure an external USB hard drive/USB flash disk with configure files has been plugged into
the USB port on the Modem Router. For details about how to configure USB devices for USB
Voice Mail function, please refer to
Quick Installation Guide
or
T5
in Appendix B:
Troubleshooting.
Figure 4-54
¾
Phone:
Displays the phone that has voice message.
¾
Source:
Displays the source of the voice message, i.e. the remote caller account.
¾
Dest:
Displays the destination of the voice message, i.e. the local account.
¾
Start Time:
Displays when the voice message starts.
¾
Length:
Displays how long the voice message is.
¾
Audition:
Click
Play
to listen to the voice message.
¾
Read Flag:
Displays whether the voice message has been read or not.
¾
Selected:
Check the box to select the corresponding voice message.
To refresh the web page, click
Refresh
button.
To delete a voice message, check the Selected box and then click
Remove
button.
To configure the USB Voice Mail, click
Config
button to enter the web page as shown in Figure
4-55.
Page 77 / 129
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
68
Figure 4-55
¾
Enable Local Play Operation Notify:
Check this box so there will be sound indication for
operation when you listen to the voice messages. This is enabled by default. If you are very
familiar with the operations, you can disable it.
¾
Enable Global Wav Format:
Check this box and all the voice message will be saved as wav
files in your USB device. It is convenient for users to listen to the voice messages on the
computer. Considering the capacity of your USB device, it is disabled by default.
¾
Enable Remove Expired Voice:
Check this box and then the expired voice messages will be
deleted automatically. Considering the capacity of USB device, it is enabled by default.
¾
Expired Days(7~15):
Configure the days that you want the voice messages to be kept.
¾
Voice Duration Limit(20~120s):
This option is used to limit the duration of a voice message.
¾
USB MailBox Capacity:
Set the capacity for the USB mailbox. Please note that the capacity
set should be less than that of the USB device.
¾
Phone Enable:
Check the box to enable this function.
¾
Phone Mode:
If
no answer
is selected,
voice notification will be played when there is no
answer.
If
unconditionally
is selected,
all incoming calls will be directed to voice mail.
¾
Customize Voice Notify For Record:
Check the box to enable voice notification
customization. To record your own voice notification, press “*30” after picking up your phone
set.
¾
Voice Notify For Record:
Select to use the default or customized voice notification.
¾
Remote Access PIN:
This PIN code is used to listen to the voice messages in a remote place.
Operations are as follows.
1)
Call the local phone and wait for the voice notification.
2)
Press “*” before the notification is over.
Page 78 / 129
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
69
3)
Input the PIN code according to the notification.
4)
You can listen to all the new messages after the PIN code is validated.
Click
Save
to save your configurations.
Click
Back
to go back to the previous page, i.e. Figure 4-54.
4.8 USB Settings
There are six submenus under the USB Settings menu,
USB Mass
Storage
,
User Accounts
,
Storage Sharing
,
FTP Server
,
Media Server
and
Print Server
. Click any of them, and you will be
able to configure the corresponding function.
4.8.1 USB Mass Storage
Choose menu “
USB Settings
”
→
“
USB Mass
Storage
”, you can configure a USB disk drive
attached to the Modem Router and view volume and share properties such as share name,
capacity, status, and action, etc on this page as shown below.
Figure 4-56
¾
Volume:
The volume name of the USB drive the users have access to.
¾
File System:
The system of the USB drive.
Page 79 / 129
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
70
¾
Capacity:
The storage capacity of the USB driver.
¾
Status:
Indicates the shared or non-shared status of the volume.
Active
means volume can
be shared, while
Inactive
means volume can not be shared. If
Deactivate
in Action
field is
enabled,
Inactive
will be displayed in the Status field, which means volume can not be
shared.
¾
Action:
When the volume is shared, you can click the
Deactivate
to stop sharing the volume;
when volume is non-shared, you can click the
Activate
button to share the volume.
Click
Disconnect
to safely remove the USB storage device that is connected to USB port.
)
Note:
Before removing the USB storage device, you should click “Disconnect” to make sure that all your
data have been saved completely. Removing device directly may cause your USB storage device
crashed.
4.8.2 User Accounts
You can specify the user name and password for Storage Sharing and FTP Server users on this
page. Storage Sharing users can access the folders by entering the following URL into the
address field of your browser or Windows Explorer, such as “\\192.168.1.1”. FTP Server users can
log into the FTP Server via FTP Client.
There are five users here, which provide means to control the access to the USB mass storage by
Storage Sharing or FTP. The Super User has the right to read and write to Storage Sharing and
FTP Server.
Figure 4-57
To add a new user account, please follow the steps below:
1.
Choose the index from the drop-down list of
Choose Index
.
2.
Self-define a
New
User Name
.
3.
Enter the password in the
New
Password
field.
Page 80 / 129
TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
71
4.
Re-enter the password in the
Confirm Password
field.
5.
Click the
Set
button,
and then a new entry will be added in the table.
6.
Click the
Apply
button to apply your settings.
Click the
Refresh
button to refresh this page immediately.
4.8.3 Storage Sharing
Choose menu “
USB Settings
”
→
“
Storage Sharing
”, you can configure a USB disk drive
attached to the Modem Router and view volume and share properties on this page as shown
below.
Figure 4-58
¾
Server Status:
Indicates the Storage Sharing's current status.
¾
Anonymous access to all the volumes:
If this function is enabled, users can access all
activated volumes of Storage Sharing without accounts.
¾
Share Name:
This folder's display name.
¾
Directory:
The real full path of the specified folder.
¾
User Access:
The authorization of the user is displayed. * users mean Super Users who
have the full-access permission to all activated volumes and share folders. Grey users mean
the users who have no right to use this function. Others are common users.
¾
Status:
The status of the entry is enabled or disabled.
¾
Edit:
Click
Edit
in the table, and then you can modify the entry.
To add a new folder, follow the instructions below.
1.
Click
Add New Folder
in Figure 4-58.

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top