TD-8840

ADSL2+ Modem Router User Guide

10

Figure 3-4

¾

Setting IP address manually

The default IP address of the ADSL2+ Modem Router is 192.168.1.1, and the default Subnet

Mask is 255.255.255.0. These values can be seen from the LAN, and can be changed as your

desire. As an example, we use the default values for description in this guide.

Step 1:

Select

Use the following IP address

radio button in the next screen.

Step 2:

Enter the IP address as 192.168.1.* (* is any value between 2 to 254). The

Subnet

mask

is 255.255.255.0. Then type the ADSL Router’s LAN IP address 192.168.1.1 into

the

Default gateway

field.

Step 3:

Select

Use the following DNS server addresses

radio button. In the

Preferred

DNS

Server

field you can enter the same value as the

Default gateway

or type the local DNS

server IP address.

TD-8840

ADSL2+ Modem Router User Guide

11

Figure 3-5

)

Note:

1)

Users of Windows 98 can open

TCP/IP Properties

according to the following: Right-click

(Mouse)

Network Neighbor

Æ

Choose

Properties

-

Æ

Double-click

TCP/IP.

2)

Users of Windows 2000/NT/XP can do the following: Right-click

Network Neighbor

Æ

Choose

Properties

Æ

Right-click

Local Connection

Æ

Choose

Properties

Æ

Double-click

Internet Protocol (TCP/IP).

3)

The words in fact may be different with this guide.

Now, you can run the Ping command in the command prompt to verify the network connection.

Please click the

Start

menu on your desktop, select

Run

tab, type

cmd

in the field, and then type

ping 192.168.1.1

on the next screen, and then press

Enter

.

If the screen looks like the following, you have been successful.

TD-8840

ADSL2+ Modem Router User Guide

12

Figure 3-6

If the screen looks like the following, the connection has failed. Please try again.

Figure 3-7

3.2

Login

Open your web browser and enter

in the address bar of the browser. When

ADSL connection is OK, the following login box will pop up. Enter default user name (

admin

) and

password (

admin

) as shown in Figure 3-8. Click

OK

to enter the Web-based Utility of the Router.

Figure 3-8

TD-8840

ADSL2+ Modem Router User Guide

13

3.3

Quick Setup

Figure 3-9 is the main page of the Router.

Figure 3-9

Please select

Quick Setup

. Enter the

VPI

and

VCI

values provided by your ISP and click

Next

.

Figure 3-10

Select the relevant

Connection Type

and

Encapsulation Mode

provided by your ISP and click

Next

.

TD-8840

ADSL2+ Modem Router User Guide

14

3.3.1 PPPoA

a)

Select PPP over ATM (PPPoA) Connection Type, and click

Next

.

Figure 3-11

b)

Enter the Username and Password provided by your ISP and click

Next

.

Figure 3-12