1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-8817
    5. /
  5. 8
Page 36 / 58 Scroll up to view Page 31 - 35
TD-8817
ADSL2/2+ Ethernet/USB Router User Guide
30
Figure 4-21
¾
QoS:
Select this option to Activate/Deactivate the IP QoS on different types (IP ToS and
DiffServ).
¾
Summary:
Click the button to view the configurations of QoS.
¾
Rule:
Configure the rules for QoS. If the traffic complies with the rule, then the Router will
take the corresponding action to deal with it.
•
Rule Index:
Select the index for the rule you want to configure.
•
Active:
Activate the rule. The rule can take effect only when it is activated.
•
Application:
Select the application that the rule aimed at.
•
Physical Ports:
Select the port whose traffic flow are controlled by the rule.
•
Destination MAC & IP & Mask & Port Range:
Enter the IP information about the
Destination host for the rule.
•
Source MAC & IP & Mask & Port Range:
Enter the IP information about the Source
Page 37 / 58
TD-8817
ADSL2/2+ Ethernet/USB Router User Guide
31
host for the rule.
•
Protocol ID:
Select one among TCP/UDP, TCP, UDP or ICMP protocols for the
application.
•
Vlan ID Range:
Enter the Vlan range, then the rule will be effective to the selected
Vlans.
•
IPP/DS Field:
Select the type of the action to assign the priority.
When you select IPP/TOS, you can assign the priority via IP information. IP QoS function is
intended to deliver guaranteed as well as differentiated Internet services by giving network
resource and usage control to the Network operator.
•
IP Precedence Range:
Enter the IP precedence range that the Router takes to
differentiate the traffic.
•
Type of Service:
Select the type of service that the Router takes to deal with the traffic.
•
802.1p:
Select the priority range for the rule.
When you select DSCP, you can assign the priority via DHCP (the header of IP group). It maps
the IP group into corresponding service class.
•
DSCP Range:
Enter the DSCP range to differentiate the traffic.
•
802.1p:
Select the priority range for the rule.
¾
Action:
Configure the action that the Router takes to deal with the traffic which accord with
the rule.
•
IPP/DS Field:
Select the type for the action.
•
IP Precedence Remarking:
Select the number to remark the priority for IP precedence.
•
Type of Service Remarking:
Select the type to remark the service.
•
DSCP Remarking:
Enter the number to remark the DSCP priority.
•
802.1p Remarking:
Select the type to remark the 802.1p priority.
•
Queue:
Select the priority type for the action.
4.4.5 VLAN
Choose “
Advanced Setup
→
VLAN
”, you can activate the VLAN function in the next screen.
Virtual LAN (VLAN) is a group of devices on one or more LANs that are configured so that they
can communicate as if they were attached to the same LAN, when in fact they are located on a
number of different LAN segments. Because VLANs are based on logical instead of physical
connections, it is very flexible for user/host management, bandwidth allocation and resource
optimization. There are two types of VLAN as follows:
Port-Based VLAN: Each physical switch port is configured with an access list specifying
membership in a set of VLANs.
ATM VLAN: Using LAN Emulation (LANE) protocol to map Ethernet packets into ATM cells and
deliver them to their destination by converting an Ethernet MAC address into an ATM address.
Page 38 / 58
TD-8817
ADSL2/2+ Ethernet/USB Router User Guide
32
Figure 4-22
1.
Assign VLAN PVID for each Interface
Click
Assign VLAN PVID for each Interface
in Figure 4-22, you can assign the PVID for each
interface in the next screen (shown in Figure 4-23).
Figure 4-23
¾
PVID:
Each physical port has a default VID called PVID (Port VID). PVID is assigned to
untagged frames or priority tagged frames (frames with null (0) VID) received on this port.
2.
Define VLAN Group
Click
Define VLAN Group
in Figure 4-22, you can define VLAN groups in the next screen (shown
in Figure 4-24).
Page 39 / 58
TD-8817
ADSL2/2+ Ethernet/USB Router User Guide
33
Figure 4-24
¾
VLAN Index:
Select the VLAN index for this VC. You can specify 8 groups in maximum.
¾
VLAN ID:
This indicates the VLAN group.
¾
ATM VCs:
Select the ATM VCs as members of VLAN, and if you leave the Tagged blank, the
tag in frames will be deleted when transmitted from the VC.
¾
Ethernet:
Select the Ethernet port as a member of VLAN, and if you leave the Tagged blank,
the tag in frames will be deleted when transmitted from the port.
¾
USB:
Select the USB port as a member of VLAN, and if you leave the Tagged blank, the tag
in frames will be deleted when transmitted from the port.
¾
VLAN Group Summary:
This displays the information about the VLAN Groups.
4.4.6 ADSL
Choose “
Advanced Setup
→
ADSL
”, you can select the ADSL Type and ADSL Mode in the next
screen. The ADSL feature can be selected when you meet the physical connection problem.
Please check the proper settings with your Internet service provider.
Page 40 / 58
TD-8817
ADSL2/2+ Ethernet/USB Router User Guide
34
Figure 4-25
¾
ADSL Mode:
Select the ADSL operation mode which your ADSL connection uses.
¾
ADSL Type:
Select the ADSL operation type which your ADSL connection uses.
4.5
Access Management
Choose “
Access Management
”, you can see the next submenus:
Figure 4-26
Click any of them, and you will be able to configure the corresponding function.
4.5.1 ACL
Choose “
Access Management
→
ACL
”, you can see the next screen (shown in Figure 4-27). You
can specify the client to access the ADSL Router once setting his IP as a Secure IP Address
through selected applications.
Figure 4-27
¾
ACL:
If
Activated
, the IP addresses which are contained in the Access Control List can

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top