TD-8817

ADSL2/2+ Ethernet/USB Router User Guide

10

Figure 3-7

Step 3:

You will see Figure 3-8 as follow, please wait a moment.

Figure 3-8

Step 4:

After that, you will see Figure 3-9. Click Finish to complete the installation.

TD-8817

ADSL2/2+ Ethernet/USB Router User Guide

11

Figure 3-9

)

Note:

1)

All of the above settings are under windows XP.

2)

If you want to pull out the USB device you must disconnect the network of USB first.

3)

In the Vista operating system, maybe the “Unknown Device” screen will pop up when you

insert the USB cable of the Router to a computer, please just unplug the USB cable and try

again.

3.3

Login

Once your host PC is properly configured, please proceed as follows to use the Web-based Utility:

Start your web browser and type the private IP address of the Router in the URL field:

192.168.1.1

.

After that, you will see the screen shown below, enter the default User Name

admin

and the

default Password

admin

,

and then click

OK

to access to the

Quick Setup

screen. You can follow

the steps below to complete the Quick Setup.

TD-8817

ADSL2/2+ Ethernet/USB Router User Guide

12

Figure 3-10

Step 1:

Select the

Quick Start

tab, then click

RUN WIZARD

, and you will see Figure 3-11. Click

the

NEXT

button.

Figure 3-11

Step 2:

Configure the time for the Router, and then click the

NEXT

button.

Figure 3-12

Step 3:

Select the connection type to connect to the ISP (We select

PPPoE/PPPoA

mode for

example here), and then click the

NEXT

button.

TD-8817

ADSL2/2+ Ethernet/USB Router User Guide

13

Figure 3-13

Step 4:

Configure the following options provided by your ISP:

Username

,

Password

,

VPI

,

VCI

and

Connection Type

. Then click

Next

.

Figure 3-14

Step 5:

Click

NEXT

to finish the Quick Start.

Figure 3-15

TD-8817

ADSL2/2+ Ethernet/USB Router User Guide

Chapter 4.

Software Configuration

This User Guide recommends using the “Quick Installation Guide” for first-time installation. For

advanced users, if you want to know more about this device and make use of its functions

adequately, maybe you will get help from this chapter to configure the advanced settings through

the Web-based Utility.

After your successful login, you can configure and manage the device. There are main menus on

the top of the Web-based Utility, submenus will be available after you click one of the main menus.

On the center of the Web-based Utility, there are the detailed configurations or status information.

To apply any settings you have altered on the page, please click the

SAVE

button.

4.1

Status

Choose “

Status

”, you can see the next submenus:

Device Info

,

System Log

and

Statistics

.

Click any of them, and you will be able to configure the corresponding function.

Figure 4-1

Choose “

Status

→

Device Info

” menu, and you will be able to view the device information,

including LAN, WAN and ADSL. The information will vary depending on the settings of the Router

configured on the Interface Setup screen.

14