Page 31 / 78
Scroll up to view Page 26 - 30
TD-8811
ADSL2+ Modem Router User Guide
26
Figure 3-23
)
Note:
After you complete any setup, the new setup must be saved and the Router must be restarted for
the configuration to take effect. Please click the
Save/Reboot
button to restart.
3.4
Change Password
You will then see the Figure 3-24, which displays some information such as link rate and so on.
Page 32 / 78
TD-8811
ADSL2+ Modem Router User Guide
27
Figure 3-24
Default value of user name and password is “admin”; if you want to change them, please go to
“Management”
Æ
“Access control”
Æ
“Password
” changing them. (Figure 3-25)
Figure 3-25
Page 33 / 78
TD-8811
ADSL2+ Modem Router User Guide
28
3.5
DHCP IP Reservation
When you specify a reserved IP address for a PC on the LAN, that PC will always receive the
same IP address each time when it accesses the DHCP server. Reserved IP addresses should
be assigned to servers that require permanent IP settings.
To setup an Address Reservation entry:
)
Note:
1.
DHCP IP Reservation is not available for the connection type of Bridge here, they won’t
display on the screen below since only Bridge is selected.
2.
DHCP IP Reservation is not available for the connection type of PPPoE with PPP IP
Extension function selected, and they won’t display on the screen below since PPP IP
Extension is selected.
Choose “
Advanced Setup
”
→
“
LAN
”, and you will see the LAN screen, the section allows you to
configure the Router’s LAN ports settings, and you can configure the DHCP IP Reservation
function in this screen.
Figure 3-25
1. Click the
Set Address Reservation
button, and the
Address Reservation
screen pop up,
Page 34 / 78
TD-8811
ADSL2+ Modem Router User Guide
29
as it showed below:
Figure 3-26
2. Click
New Entry
button to add new entries, and the screen showed below pop up, you can
modify an address reservation entry in this screen;
Figure 3-27
3. Type the MAC Address (00:11:22:33:44:AA for instance) of the computer which you want to
reserve an IP (192.168.1.23 for instance) for in the
MAC Address
text box;
4. Type the IP Address (192.168.1.23 for instance) you have reserved in the
Reserved IP
Address
text box;
5. Click
Save
button to save the settings you have set;
)
Note:
The MAC Address and IP Address added in the text box used for illustrating. That may be
different to your circs.
6. When you have saved the settings, the new entry will added to the
Address Reservation
screen showed below.
Page 35 / 78
TD-8811
ADSL2+ Modem Router User Guide
30
Figure 3-28
7. Click
Save/Reboot
button to save the settings and reboot the router.
)
Note:
The function won't take effect until the router reboots.
3.6
USB Configuration
If you use the USB interface, firstly, you must install the USB driver to the computer. You can
obtain the drives from the provided CD or download from our website. (
)
USB Drive installation procedures
If the hardware is installed before the computer is Power On. Please turn on the computer and
enter the operating system, Then the operating system will identify the device. If the hardware is
installed after the computer is Power On, the desktop will display the information about finding
the new hardware.
1)
You will see the Figure 3-26 requiring install software for USB Device, select “Install from a
list or specific location (Advanced)” and click
Next
to continue.
19216811.live