89
Chapter 13
Administrate Your Network
13° 1°
Set System Time and Region
System time is the time displayed while the modem router is running. The system time
you configure here will be used for other time-based functions like Parental Controls
and Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1°
Visit
http://tplinkmodem.net
, and log in with the password you set for the modem
router.
2°
Go to
Advanced
>
System Tools
>
Time Settings
page.
Note:
Per EU requirements, all Wi-Fi products marketed in EU, U.S. region is not selectable.
3°
Select your
Region
from the drop-down list. The region is where the wireless
function of the device can be used. It may be illegal to use the wireless function
of the device in a region other than regions specified in the list. If your country or
region is not listed, please contact your local government agency for assistance.
4°
Configure the system time using the following methods :
Manually:
Select your time zone and enter your local time.
Get from PC:
Click this button if you want to use the current managing PC’s time.
Get GMT:
Click this button if you want to get time from the Internet. Make sure your
modem router can access the Internet before you select this way to get system
time.
5°
Click
Save
to make your settings effective.
6°
After setting the system time, you can set
Daylight Saving
time according to your
needs. Tick the checkbox to enable
Daylight Saving
, set the start and end time and
then click
Save
to make the settings effective.
19216811.live