1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer D9
    5. /
  5. 22
Page 106 / 125 Scroll up to view Page 101 - 105
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-99
WAN Connection:
Select a WAN connection from the drop-down list. Only the connected
WAN connections can be shown in the drop-down list.
Configuration Type:
Select a configuration type for this tunnel. Auto means to obtain the
following parameters automatically while Manual means you set them up manually. If Auto is
selected, only Dynamic IP WAN connection can be selected from the drop-down list.
IPv4 Mask Length:
The length of the selected WAN connection’s IPv4 mask.
6RD Prefix:
The prefix of the 6RD tunnel.
6RD Prefix Length:
The length of the 6RD prefix.
Border Relay IPv4 Address:
The IPv4 address of the border relay router of 6RD tunnel.
Note:
In this type, there should not be any IPv6 WAN connections. If there are IPv6 WAN connections,
the page will advise you to delete all the IPv6 WAN connections.
3)
6to4
This type is used in the situation that your WAN connection is IPv4 while LAN connection is IPv6.
Select 6to4, and you will see the screen as shown in Figure 4-100.
Figure 4-100
WAN Connection:
Select a WAN connection from the drop-down list. Only the connected
WAN connections can be shown in the drop-down list.
Note:
In this type, there should not be any IPv6 WAN connections. If there are IPv6 WAN connections,
the page will prompt you to delete all the IPv6 WAN connections.
95
Page 107 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
4.19 Bandwidth Control
Choose menu “
Bandwidth Control
”, and then you can configure the Upstream Bandwidth and
Downstream Bandwidth in the next screen. The values you configure should be less than
1000000Kbps. For optimal control of the bandwidth, please select the right Line Type and consult
your ISP for the total bandwidth of the egress and ingress.
Figure 4-101
Enable Bandwidth Control:
Check this box to make the Bandwidth Control settings take
effect. The bandwidth control rules won’t take effect if bandwidth control is disabled.
Total Upstream Bandwidth:
The upload speed through the WAN port
.
Total Downstream Bandwidth:
The download speed through the WAN port.
Enable IPTV Bandwidth Guarantee:
Check the box to enable IPTV bandwidth control.
Description:
This is the information about the rules such as address range.
Priority:
The priority of Bandwidth Control rules. ‘1’ stands for the highest priority while ‘8’
stands for the lowest priority. The total Upstream/ Downstream Bandwidth is first allocated to
guarantee all the Min Rate of Bandwidth Control rules. If there is any bandwidth left, it is first
allocated to the rule with the highest priority, then to the rule with the second highest priority,
and so on.
Upstream bandwidth:
This field displays the max and min upload bandwidth through the
WAN port.
Downstream bandwidth:
This field displays the max and min download bandwidth through
the WAN port.
Status:
The status of this rule, either Enabled or Disabled.
Edit:
Click
Edit
to modify the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1.
Click
Add New
shown in
Figure 4-101, you will see a new screen shown in
Figure 4-102.
2.
Enter the information as the screen shown below.
96
Page 108 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-102
3.
Click the
Save
button.
Click the
Enable/ Disable Selected
button to make selected entries enabled or disabled.
Click the
Delete Selected
button to delete the selected entries.
4.20 IP&MAC Binding
There are two submenus under the IP &MAC Binding menu:
Binding Settings
and
ARP List
.
Click any of them, and you will be able to scan or configure the corresponding function. The
detailed explanations for each submenu are provided below.
4.20.1 Binding Settings
This page displays the
IP & MAC Binding Setting
table; you can operate it in accord with your
desire (shown in
Figure 4-103).
Figure 4-103
MAC Address:
The MAC address of the controlled computer in the LAN.
IP Address:
The assigned IP address of the controlled computer in the LAN.
Binding Status:
Indicates whether or not the MAC address and IP address are bound.
Edit:
To modify or delete an existing entry.
97
Page 109 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
When you want to add or modify an IP & MAC Binding entry, you can click the
Add New
button or
Edit
button, and then you will go to the next page. This page is used for adding or modifying an IP
& MAC Binding entry (shown in Figure 4-104.)
Figure 4-104
To add IP & MAC Binding entries, follow the steps below.
1.
Click the
Add New
button as shown in Figure 4-103.
2.
Enter the MAC Address and IP Address.
3.
Select the Bind checkbox.
4.
Click the
Save
button to save it.
To modify or delete an existing entry, follow the steps below.
1.
Find the desired entry in the table.
2.
Click
Edit
as desired on the
Edit
column.
Click the
Enable/ Disable Selected
button to make selected entries enabled or disabled.
Click the
Delete Selected
button to delete the selected entries.
4.20.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List and shows all the existing IP & MAC
Binding entries (shown in Figure 4-105).
Figure 4-105
MAC Address:
The MAC address of the controlled computer in the LAN.
IP Address:
The assigned IP address of the controlled computer in the LAN.
Status:
Indicates whether or not the MAC and IP addresses are bound.
Click the
Load Selected
button to load selected items to the IP & MAC Binding list.
98
Page 110 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Click the
Delete Selected
button to delete the selected entries.
Click the
Refresh
button to refresh all items.
4.21 Dynamic DNS
Choose menu “
Dynamic DNS
”, and you can configure the Dynamic DNS function.
The modem router offers the
DDNS
(Dynamic Domain Name System) feature, which allows the
hosting of a website, FTP server, or e-mail server with a fixed domain name (named by yourself)
and a dynamic IP address, then your friends can connect to your server by entering your domain
name no matter what your IP address is. Before using this feature, you need to sign up for DDNS
service providers such as
www.no-ip.com
. The Dynamic DNS client service provider will give you
a password or key.
Figure 4-106
Service Provider:
This field displays the service provider of DDNS.
Domain Name:
Enter the Domain name you received from the DDNS service provider.
Username & Password:
Type in the “User Name” and “Password” for your DDNS account.
Enable DDNS:
Check to activate the DDNS function.
Login/ Logout:
Log in to or log out of the DDNS service.
4.22 Diagnostic
Choose “
Diagnostic
”, you can view the test results for the connectivity of the physical layer and
protocol layer for both LAN and WAN sides in the screen. Select your desired type and click the start
button.
99

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top