Page 101 / 125
Scroll up to view Page 96 - 100
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-90
2.
Give a name (e.g. Rule_1) for the rule in the
Description
field.
3.
Select a host from the
IPv6
LAN
Host
drop-down list or choose “
Add IPv6 LAN Host
”.
4.
Select a host from the
IPv6 WAN Host
drop-sown list or choose “
Add IPv6 WAN Host
”.
5.
Select a schedule from the
IPv6
Schedule
drop-down list or choose “
Add IPv6 Schedule
”.
6.
In the
Action
field, select
Deny
or
Allow
to deny or allow your entry.
7.
In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
8.
In the
Direction
field, select
IN
or
OUT
from the drop-down list for the direction.
9.
In the
Protocol
field, here are four options, All, TCP, UDP, and ICMPv6. Select one of them
from the drop-down list for the target.
10. Click the
Save
button to save the settings.
Click the
Enable/ Disable Selected
button to make selected entries enabled or disabled.
Click the
Delete Selected
button to delete the selected entries.
4.17.2 IPv6 LAN Host
Choose menu “
IPv6
Firewall
”
→
“
IPv6 LAN
Host
”, and then you can view and set a Host list in
the screen as shown in Figure 4-91.
Figure 4-91
Description:
Here displays the description of the host and this description is unique.
IPv6 Address Info:
Here displays the information about the host.
90
Page 102 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Edit:
To modify an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button, and you will see the screen as shown in Figure 4-92.
Figure 4-92
2.
Create a unique name for the host (e.g. Host_1) in the
Description
field.
3.
Enter an IPv6 address in the
IPv6 Address
field.
4.
Enter the prefix length of the IPv6 address in the
Prefix Length
field.
5.
Click the
Save
button to save the settings.
Click the
Delete Selected
button to delete the selected entries.
4.17.3 IPv6 WAN Host
Choose menu “
IPv6 Firewall
”
→
“
IPv6 WAN
Host
”, and then you can view and set a Host list in
the screen as shown in Figure 4-93.
Figure 4-93
Description:
Here displays the description about the WAN and this description is unique.
Details:
The details can be IPv6 address, prefix length or port.
Edit:
To modify an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button, and you will see the screen as shown in Figure 4-94.
91
Page 103 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-94
2.
Create a unique description for the host (e.g. Host_1) in the
Description
field.
3.
Enter an IPv6 address in the
IPv6 Address
field.
4.
Enter the prefix length of the IPv6 address in the
Prefix Length
field.
5.
Click the
Save
button to save the settings.
Click the
Delete Selected
button to delete the selected entries.
4.17.4 IPv6 Schedule
Choose menu “
IPv6 Firewall
”
→
“
IPv6 Schedule
”, and then you can view and set a Schedule list
in the next screen as shown in Figure 4-95.
Figure 4-95
Description
: Here displays the description of the schedule and this description is unique.
Edit
: Here you can modify an existing schedule.
To add a new schedule, follow the steps below:
1.
Click
Add New
button and you will see the screen as shown in Figure 4-96.
92
Page 104 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-96
2.
Create a unique description for the schedule (e.g. Schedule_1) in
Description
field.
3.
Select the day or days you need in
Apply To
field.
4.
In time field, you can select all day-24 hours or you may enter the
Start Time
and
End Time
in the corresponding field.
5.
Click
Save
to save the settings.
Click the
Clear Schedule
button to clear your settings in the table.
Click the
Delete Selected
button to delete the selected entries.
4.18 IPv6 Tunnel
IPv6 tunnel is a kind of transition mechanism to enable IPv6-only hosts to reach IPv4 services and
to allow isolated IPv6 hosts and networks to reach each-other over IPv4-only infrastructure before
IPv6 completely supplants IPv4. It is a temporary solution for networks that do not support native
dual-stack, where both IPv6 and IPv4 run independently.
Choose menu “
IPv6 Tunnel
”, and you will see the screen as shown in Figure 4-97.
93
Page 105 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-97
Enable:
Check the box to enable IPv6 Tunnel function. It is disabled by default.
Mechanism:
Select a type for IPv6 tunnel from the drop-down list. DS-Lite, 6RD and 6to4 are
supported.
1)
DS-Lite
This type is used in the situation that your WAN connection is IPv6 while LAN connection is IPv4.
Select DS-Lite, and you will see the screen as shown in Figure 4-98.
Figure 4-98
WAN Connection:
Select a WAN connection from the drop-down list. Only the connected
WAN connections can be shown in the drop-down list.
Configuration Type:
Select a configuration type for this tunnel.
Auto
means to obtain the
Remote IPv6 Address automatically while
Manual
means you set it manually.
Remote IPv6 Address:
Enter the IPv6 address of the remote node.
Note:
In this type, there should not have any IPv4 WAN connections. If there are IPv4 WAN connections,
the page will prompt you to delete all the IPv4 WAN connections.
2)
6RD
This type is used in the situation that your WAN connection is IPv4 while LAN connection is IPv6.
Select 6RD, and you will see the screen as shown in Figure 4-99.
94
19216811.live