Page 21 / 124 Scroll up to view Page 16 - 20
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
10
1)
Is the connection between your PC and the router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2)
Is the TCP/IP configuration for your PC correct?
If the router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2 Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the Archer D7 AC1750 Wireless Dual
Band Gigabit ADSL2+ Modem Router. The Web-based utility can be used on any Windows,
Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or
Apple Safari.
1.
To access the configuration utility, open a web-browser and type the default address
http://tplinkmodem.net/
in the address field of the browser.
Figure 3-1
After a moment, a login window will appear, similar to the Figure 3-2. Enter
admin
for the
User Name and Password, both in lower case letters. Then click the
Login
button or press the
Enter
key.
Figure 3-2
Page 22 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
11
Note:
1)
Do not mix up the user name and password with your ADSL account user name and password
which are needed for PPP connections.
2)
If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
Go to
Tools
menu
Internet Options
Connections
LAN Settings
, in the screen that
appears, cancel the Using Proxy checkbox, and click
OK
to finish it.
2.
After your successful login, you will see the Login screen as shown in Figure 3-3. Click
Quick Setup
menu to access
Quick Setup
Wizard
.
Figure 3-3
3.
The
Quick Setup
page will appear for you to quickly configure your modem router, Click
Next
to continue.
Figure 3-4
4.
Select the
Region
and the
Time Zone
from the drop-down list, then click
Next
.
Figure 3-5
Page 23 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
12
5.
Select
Yes
and then click
Next
to continue.
Figure 3-6
Note:
If the connection type can not be detected, please select
No
to configure it manually (shown in
Figure 3-7).
Figure 3-7
A. Configuration for PPPoE/PPPoA
Enter the
Username
,
Password
given by your ISP, and then click
Next
.
Figure 3-8
Page 24 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
13
Note:
If you are using the modem router on a new DSL line and have not completed your DSL provider’s
online registration, you may be using a generic username and password. When registration is
completed, you will need to update the username and password if you have created a new one.
B. Configuration for Dynamic IP or Bridge
This type doesn't need to be configured.
C. Configuration for Static IP or IPoA
Enter the
Static IP
or
IPoA
information
provided by your ISP, and then click
Next
.
Figure 3-9
6.
Configure the basic parameters for 2.4GHz wireless network in the following screen as shown
in Figure 3-10, and then click
Next
.
Figure 3-10
7.
Configure the basic parameters for 5GHz wireless network in the following screen as shown
in Figure 3-11, and then click
Next
.
Page 25 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
14
Figure 3-11
8.
On this page, please confirm all parameters. Click
Back
to modify or click the
Save
button to
save your configuration.
Figure 3-12
9.
You will see the
Complete
screen below, click
Finish
to complete these settings.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top