1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer D7
    5. /
  5. 16
Page 76 / 124 Scroll up to view Page 71 - 75
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
65
You can enable or disable Guest Network. When you enable this function, you could set wireless
parameters for Guest Network.
SSID:
The guest network name. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network. The
default name is TP-LINK Guestxx (xx is the last two numbers of MAC address).
Security:
The default value is disabled, but it’s strongly recommended to enable
WPA/WPA2-Personal. WPA/WPA2-Personal is the WPA/WPA2 authentication type based
on pre-shared passphrase.
Authentication Type:
Select the Authentication Type from the drop-down list, the default
method is
Auto
, and you can leave it as a default setting.
Encryption:
You can select either
Auto
, or
TKIP
or
AES.
Wireless Password:
You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters.
Group Key Update Period:
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Allow Guests to access my Local Network
: The guests have access to your Local
Network, but can not login the modem router’s web management interface.
Allow Guests to access my USB Storage Sharing:
The guests can access the specified
files on the USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server and Print Server are not available in Guest Network. For more
details please refer to
4.11.3 Storage Sharing
.
Guest Network Isolation:
This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.
Guest Network Bandwidth Control:
With this function, you can configure the Upstream
Bandwidth and Downstream Bandwidth for guest network.
Click
Save
to save your settings.
4.10.3 Guest Status 2.4GHz
Choose menu “
Guest Network
”
“
Guest Status 2.4GHz
”, you can see the MAC Address,
Current Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-53
MAC Address:
The connected wireless station's MAC address.
Current Status:
The connected wireless station's running status.
Received Packets:
Packets received by the station.
Sent Packets:
Packets sent by the station.
Page 77 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
66
Click on the
Refresh
button to update this page.
4.10.4 Guest Status 5GHz
Choose menu “
Guest Network
”
“
Guest Status 5GHz
”, you can see the MAC Address, Current
Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-54
MAC Address:
The connected wireless station's MAC address.
Current Status:
The connected wireless station's running status.
Received Packets:
Packets received by the station.
Sent Packets:
Packets sent by the station.
Click on the
Refresh
button to update this page.
4.11 USB Settings
There are six submenus under the USB Settings menu,
USB Mass
Storage
,
User Accounts
,
Storage Sharing
,
FTP Server
,
Media Server
and
Print Server
. Click any of them, and you will be
able to configure the corresponding function.
4.11.1 USB Mass Storage
Choose menu “
USB Settings
→
”
USB Mass
Storage
”, you can configure a USB disk drive
attached to the modem router and view volume and share properties such as share name,
capacity, status, and action, etc on this page as shown below.
Page 78 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
67
Figure 4-55
Volume:
The volume name of the USB drive the users have access to.
File System:
The system of the USB drive.
Capacity:
The storage capacity of the USB driver.
Status:
Indicates the shared or non-shared status of the volume.
Active
means volume can
be shared, while
Inactive
means volume can not be shared. If
Inactive
in Action
field is
enabled,
Active
will be displayed in the Status field, which means volume can not be shared.
Action:
When the volume is shared, you can click the
Deactivate
to stop sharing the volume;
when volume is non-shared, you can click the
Activate
button to share the volume.
Click
Disconnect
to safely remove the USB storage device that is connected to USB port.
Note:
Before removing the USB storage device, you should click “Disconnect” to make sure that all your
data have been saved completely. Removing device directly may cause your USB storage device
crashed.
4.11.2 User Accounts
You can specify the user name and password for Storage Sharing and FTP Server users on this
page. Storage Sharing users can access the folders by entering the following URL into the
address field of your browser or Windows Explorer, such as. \\192.168.1.1. FTP Server users can
log into the FTP Server via FTP Client.
There are five users here, which provide means to control the access to the USB mass storage by
Storage Sharing or FTP. The Super User has the right to read and write to Storage Sharing and
FTP Server.
Page 79 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
68
Figure 4-56
To add a new user account, please follow the steps below:
1.
Choose the index from the drop-down list of
Choose Index
.
2.
Self-define a
New
Username
.
3.
Enter the password in the
New
Password
field.
4.
Re-enter the password in the
Confirm password
field.
5.
Click the
Set
button,
and then a new entry will be added in the table.
To delete an existing user account, please click
Delete
in the
Action
column.
4.11.3 Storage Sharing
Choose menu “
USB Settings
”
→
”
Storage Sharing
”, you can configure a USB disk drive
attached to the modem router and view volume and share properties on this page as shown
below.
Figure 4-57
Server Status:
Indicates the Storage Sharing's current status.
Page 80 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
69
Anonymous access to all the volumes:
This function is enabled by default, so users can
access all activated volumes of Storage Sharing without accounts. If you want to add a
shared folder which does not allow anonymous login, uncheck the box to disable this
function. And
Folder Table
will be displayed
as shown below.
Share Name:
This folder's display name.
Directory:
The real full path of the specified folder.
User Access:
The authorization of the user is displayed. * users mean Super Users who
have the full-access permission to all activated volumes and share folders. Grey users mean
the users who have no right to use this function. Others are common users.
Status:
The status of the entry is enabled or disabled.
Edit:
Click
Edit
in the table, and then you can modify the entry.
To add a new folder, follow the instructions below.
1.
Click
Add New Folder
.
Figure 4-58
2.
Click the
Browse
button, and then select the
Select Volume
from the drop-down list.
3.
Enter display name of the share folder in
Share Name
filed.
4.
Click the
Apply
button to apply the settings.
You can click the
upper
button to go to the upper folder

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top