1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer D5
    5. /
  5. 25
Page 121 / 127 Scroll up to view Page 116 - 120
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
110
Figure 4-116
Traffic Status:
If it is disabled, the function of DoS protection in Security settings will be
disabled.The default value is disabled. To enable it, click the
Enable
.
Statistics Interval (5-60):
Indicates the time section of the packets statistic. The default value
is 10. Select a value between 5 and 60 seconds in the drop-down list.
Click
Reset
All
to reset the values of all the entries to zero.
Click
Delete
All
to delete all entries in the table.
Click the
Refresh
button to refresh immediately.
Statistics Table:
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Packets
The total number of packets received and transmitted by the
modem router.
Total
Bytes
The total number of bytes received and transmitted by the
modem router.
Packets
The total number of packets received and transmitted in the last
Packets Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last
Packets Statistic interval seconds.
ICMP
Tx
The number of the ICMP packets transmitted to WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
UDP Tx
The number of UDP packets transmitted to the WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Current
SYN Tx
The number of TCP SYN packets transmitted to the WAN per
second at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Page 122 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
111
Reset
Reset the value of the entry to zero.
Operation
Delete
Delete the existing entry in the table.
4.24 Logout
Choose “
Logout
”, and you will back to the login screen as shown in Figure 4-117.
Figure 4-117
Page 123 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
112
Appendix A: Specifications
General
Standards and Protocols
ANSI T1.413, ITU G.992.1, ITU G.992.3, ITU G.992.5,
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE
802.11ac, IEEE 802.3, IEEE 802.3u, IEEE802.3ab,
TCP/IP, PPPoA,
PPPoE, SNTP, HTTP, DHCP, ICMP, NAT
Safety & Emission
FCC, CE
Ports
Four 10/100/1000M Auto-Negotiation RJ45 ports
（
Auto MDI/MDIX)
One RJ11 port
Two USB 2.0 ports
LEDs
WPS,
USB,
(LAN),
Wireless,
Internet,
ADSL,
Power
Network Medium
10Base-T:
UTP category 3, 4, 5 cable
100Base-TX: UTP category-5, 5e cable
1000Base-TX: UTP category-5, 5e cable
Max line length: 6.5Km
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 1Mbps
System Requirement
Windows 8/7/Vista/XP or Mac OS or Linux-based operating system
Microsoft Internet Explorer, Firefox, Chrome or Safari browser for
web-based configuration
Physical and Environment
Working Temperature
0
~ 40
℃
℃
Working Humidity
10% ~ 90% RH (non-condensing)
Storage Temperature
-40
~ 70
℃
℃
Storage Humidity
5% ~ 90% RH (non-condensing)
Page 124 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
113
Appendix B: Troubleshooting
T1. How do I restore my modem router’s configuration to its factory default
settings?
With the modem router powered on, press and hold the
RESET
button on the rear panel for 8 to
10 seconds before releasing it.
Note
:
Once the modem router is reset, the current configuration settings will be lost and you will need to
re-configure the router.
T2. What can I do if I don’t know or forget my password?
1) Restore the modem router’s configuration to its factory default settings. If you don’t know how
to do that, please refer to
T1
.
2) Use the default user name and password:
admin
,
admin
.
3) Try to configure your modem router once again by following the instructions in
3.2 Quick
Installation Guide.
T3. What can I do if I cannot access the web-based configuration page?
1) Configure your computer’s IP Address.
For Mac OS X
1
）
Click the
Apple
icon on the upper left corner of the screen.
2
）
Go to “
System Preferences
->
Network
”.
3
）
Select
Airport
on the left menu bar, and then click
Advanced
for wireless configuration; or
select
Ethernet
for wired configuration.
4
）
In the
Configure IPv4
box under
TCP/IP
, select
Using DHCP
.
5
）
Click
Apply
to save the settings.
For Windows 7
1
）
Click “
Start
->
Control Panel
->
Network and Internet
->
View network status
->
Change
adapter settings
”.
2
）
Right-click
Wireless Network Connection
(or
Local Area Connection
), and then click
Properties
.
3
）
Select
Internet Protocol Version 4 (TCP/IPv4)
, and then click
Properties
.
4
）
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
.
Then click
OK
.
For Windows XP
1
）
Click “
Start
->
Control Panel
->
Network and Internet Connections
->
Network
Connections
”.
2
）
Right-click
Wireless Network Connection
(or
Local Area Connection
), and then click
Properties
.
3
）
Select
Internet Protocol (TCP/IP)
, and then click
Properties
.
Page 125 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
114
4
）
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
.
Then click
OK
.
For Windows 8
1
）
Move your mouse to the lower right corner and you will see
Search
icon
in the
Popups.
Go to “
->
Apps
”. Type
Control Panel
in the search box and press
Enter
, then you will go
to
Control Panel
.
2
）
Click “
View network status and tasks
>
Change adapter settings
”.
3
）
Right-click “
Ethernet
” and then select
Properties
.
4
）
Double-click
Internet Protocol Version 4 (TCP/IPv4)
. Select
Obtain an IP address
automatically
, choose
Obtain DNS server address automatically
and then click
OK
.
2) Configure your IE browser
Open your IE browser, click
Tools
tab and you will see the
following screen.
Click
Internet Options
Click
OK
Select
Never dial a
connection

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top