Page 101 / 127
Scroll up to view Page 96 - 100
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
90
Figure 4-85
Description
: Here displays the description of the schedule and this description is unique.
Edit
: Here you can modify an existing schedule.
To add a new schedule, follow the steps below:
1. Click
Add New
button and the next screen will pop-up as shown in Figure 4-86.
2. In
Description
field, create a unique description for the schedule (e.g. Schedule_1).
3. In
Apply To
field, select the day or days you need.
4.
In time field, you can select all day-24 hours or you may enter the
Start Time
and
Stop Time
in the corresponding field.
5. Click
Save
to complete the settings.
Click the
Clear Schedule
button to clear your settings in the table.
Figure 4-86
Click the
Delete Selected
button to delete the slected entries in the table.
Page 102 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
91
4.17 IPv6 Firewall
There are four submenus under the IPv6 Firewall menu:
IPv6 Rule
,
IPv6
LAN
Host
,
IPv6
WAN
Host
and
IPv6
Schedule
. Click any of them, and you will be able to configure the corresponding
function.
4.17.1 IPv6 Rule
Choose menu “
IPv6 Firewall
”
→
“
IPv6 Rule
”, and then you can view and set access control
rules in the screen as shown in Figure 4-87.
Figure 4-87
Enable IPv6 Firewall:
Select the check box to enable the IPv6 Firewall function, so the
Default Filtering Rules can take effect.
Description:
Here displays the description of the IPv6 rule and this name is unique.
IPv6 LAN Host:
Here displays the LAN host selected in the corresponding rule.
IPv6 LAN Host:
Here displays the WAN host selected in the corresponding rule.
Schedule:
Here displays the schedule selected in the corresponding rule.
Action
：
Here displays the action selected in the corresponding rule.
Status:
Here displays the status of the rule either enabled or disabled.
Edit:
Here you can edit or delete an existing rule.
To add a new IPv6 rule:
1.
Click the
Add New
button, and you will see the screen as shown in Figure 4-88.
Page 103 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
92
Figure 4-88
2.
Give a name (e.g. Rule_1) for the rule in the
Description
field.
3.
Select a host from the
IPv6
LAN
Host
drop-down list or choose “
Add IPv6 LAN Host
”.
4.
Select a host from the
IPv6 WAN Host
drop-sown list or choose “
Add IPv6 WAN Host
”.
5.
Select a schedule from the
IPv6
Schedule
drop-down list or choose “
Add IPv6 Schedule
”.
6.
In the
Action
field, select
Deny
or
Allow
to deny or allow your entry.
7.
In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
8.
In the
Direction
field, select
IN
or
OUT
from the drop-down list for the direction.
9.
In the
Protocol
field, here are four options, All, TCP, UDP, and ICMPv6. Select one of them
from the drop-down list for the target.
10. Click the
Save
button to save the settings.
Click the
Enable/ Disable Selected
button to make selected entries enabled or disabled.
Click the
Delete Selected
button to delete the selected entries.
4.17.2 IPv6 LAN Host
Choose menu “
IPv6
Firewall
”
→
“
IPv6 LAN
Host
”, and then you can view and set a Host list in
the screen as shown in Figure 4-89.
Figure 4-89
Description:
Here displays the description of the host and this description is unique.
IPv6 Address Info:
Here displays the information about the host.
Page 104 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
93
Edit:
To modify an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button, and you will see the screen as shown in Figure 4-90.
Figure 4-90
2.
Create a unique name for the host (e.g. Host_1) in the
Description
field.
3.
Enter an IPv6 address in the
IPv6 Address
field.
4.
Enter the prefix length of the IPv6 address in the
Prefix Length
field.
5.
Click the
Save
button to save the settings.
Click the
Delete Selected
button to delete the selected entries.
4.17.3 IPv6 WAN Host
Choose menu “
IPv6 Firewall
”
→
“
IPv6 WAN
Host
”, and then you can view and set a Host list in
the screen as shown in Figure 4-91.
Figure 4-91
Description:
Here displays the description about the WAN and this description is unique.
Details:
The details can be IPv6 address, prefix length or port.
Edit:
To modify an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button, and you will see the screen as shown in Figure 4-92.
Page 105 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
94
Figure 4-92
2.
Create a unique description for the host (e.g. Host_1) in the
Description
field.
3.
Enter an IPv6 address in the
IPv6 Address
field.
4.
Enter the prefix length of the IPv6 address in the
Prefix Length
field.
5.
Click the
Save
button to save the settings.
Click the
Delete Selected
button to delete the selected entries.
4.17.4 IPv6 Schedule
Choose menu “
IPv6 Firewall
”
→
“
IPv6 Schedule
”, and then you can view and set a Schedule list
in the next screen as shown in Figure 4-93.
Figure 4-93
Description
: Here displays the description of the schedule and this description is unique.
Edit
: Here you can modify an existing schedule.
To add a new schedule, follow the steps below:
1.
Click
Add New
button and you will see the screen as shown in Figure 4-94.
19216811.live