1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer D5
    5. /
  5. 16
Page 76 / 127 Scroll up to view Page 71 - 75
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
65
Figure 4-50
MAC Address:
The connected wireless station's MAC address
Current Status:
The connected wireless station's running status, one of
STA-AUTH/
STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/ Disconnected
Received Packets:
Packets received by the station
Sent Packets:
Packets sent by the station
Click on the
Refresh
button to update this page.
4.10 Guest Network
There are four submenus under the Guest Network menu:
Basic Settings 2.4GHz
,
Basic
Settings 5GHz
,
Guest Status 2.4GHz
and
Guest Status 5GHz
. Click any of them, and you will
be able to scan or configure the corresponding function. The detailed explanations for each
submenu are provided below.
4.10.1 Basic Settings 2.4GHz
Choose menu “
Guest Network
”
“
Basic Settings 2.4GHz
”, and you will see the screen as
shown in Figure 4-51. This feature allows you to create a separate network for your guests without
allowing
them
to
access
your
main
network
and
the
computers
connected
to
it.
Page 77 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
66
Figure 4-51
Guest Network:
When enable this function, you can set wireless parameters for guest
network.
SSID:
The guest network name. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network. The
default name is TP-LINK Guest_2.4GHz.
Security:
It’s strongly recommended to enable WPA/WPA2-Personal.
Authentication Type:
Select the Authentication Type from the drop-down list. You can keep
the default setting which is
Auto
.
Encryption:
You can select
Auto
,
TKIP
or
AES.
Wireless Password:
You can enter the ASCII characters between 8 and 63 characters or 8
to 64 Hexadecimal characters.
Group Key Update Period:
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Allow Guests to access my Local Network
: The guests have access to your Local
Network, but can not login the modem router’s web-management page.
Allow Guests to access my USB Storage Sharing:
The guests can access the specified
files on the USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server and Print Server are not available in Guest Network. For more
details please refer to
4.11.3 Storage Sharing
.
Guest Network Isolation:
This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.
Guest Network Bandwidth Control:
With this function, you can configure the Upstream
/Downstream Bandwidth for guest network.
Click
Save
to save your settings.
4.10.2 Basic Settings 5GHz
Choose menu “
Guest Network
”
“
Basic Settings 5GHz
”, and you will see the screen as shown
in Figure 4-52. This feature allows you to create a separate network for your guests without
allowing them to access your main network and the computers connected to it.
Page 78 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
67
Figure 4-52
Guest Network:
When enable this function, you can set wireless parameters for guest
network.
SSID:
The guest network name. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network. The
default name is TP-LINK Guest_5GHz.
Security:
It’s strongly recommended to enable WPA/WPA2-Personal. WPA/WPA2-Personal
is the WPA/WPA2 authentication type based on pre-shared passphrase.
Authentication Type:
Select the Authentication Type from the drop-down list, the default
method is
Auto
, and you can leave it as a default setting.
Encryption:
You can select
Auto
,
TKIP
or
AES.
Wireless Password:
You can enter the ASCII characters between 8 and 63 characters or 8
to 64 Hexadecimal characters.
Group Key Update Period:
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Allow Guests to access my Local Network
: The guests have access to your Local
Network, but can not login the modem router’s web management page.
Allow Guests to access my USB Storage Sharing:
The guests can access the specified
files on the USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server and Print Server are not available in Guest Network. For more
details please refer to
4.11.3 Storage Sharing
.
Guest Network Isolation:
This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.
Guest Network Bandwidth Control:
With this function, you can configure the Upstream
/Downstream Bandwidth for guest network.
Click
Save
to save your settings.
Page 79 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
68
4.10.3 Guest Status 2.4GHz
Choose menu “
Guest Network
”
“
Guest Status 2.4GHz
”, you can see the MAC Address,
Current Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-53
MAC Address:
The connected wireless station's MAC address.
Current Status:
The connected wireless station's running status.
Received Packets:
Packets received by the station.
Sent Packets:
Packets sent by the station.
Click on the
Refresh
button to update this page.
4.10.4 Guest Status 5GHz
Choose menu “
Guest Network
”
“
Guest Status 5GHz
”, you can see the MAC Address, Current
Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-54
MAC Address:
The connected wireless station's MAC address.
Current Status:
The connected wireless station's running status.
Received Packets:
Packets received by the station.
Sent Packets:
Packets sent by the station.
Click on the
Refresh
button to update this page.
Page 80 / 127
Archer
D5
AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
69
4.11 USB Settings
There are six submenus under the USB Settings menu,
USB Mass
Storage
,
User Accounts
,
Storage Sharing
,
FTP Server
,
Media Server
and
Print Server
. Click any of them, and you will be
able to configure the corresponding function.
4.11.1 USB Mass Storage
Choose menu “
USB Settings
→
”
USB Mass
Storage
”, you can configure a USB disk drive
attached to the modem router and view volume and share properties such as share name,
capacity, status, and action, on this page as shown below.
Figure 4-55
Volume:
The volume name of the USB drive the users have access to.
File System:
The system of the USB drive.
Capacity:
The storage capacity of the USB driver.
Status:
Indicates the shared or non-shared status of the volume.
Active
means volume can
be shared, while
Inactive
means volume can not be shared. If
Inactive
in Action
field is
enabled,
Active
will be displayed in the Status field, which means volume can not be shared.
Action:
When the volume is shared, you can click the
Deactivate
to stop sharing the volume;

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top