7

Chapter 1

Get to Know About Your Modem Router

1° 3° 2°

The Back Panel

The modem router’s back panel shows the antennas, connection ports and buttons.

Refer to the following for detailed instructions.

Item

Description

Antennas

Used for wireless operation and data transmit. For the best Wi-Fi performance,

the center antenna should be vertical and the others should be outwards at

30 degree angles, as shown in the picture above.

ADSL

For connecting the modem router to the Internet. Connect the port to the

splitter or directly connect the port to the phone jack via a phone cable. For

details, please refer to Connect the Modem Router.

USB

For connecting to a USB storage device or a USB printer

.

WPS

The switch for the WPS function.

WiFi ON/OFF

For turning on/off the Wi-Fi function.

RESET

The switch for the RESET function. There are two ways to reset the modem

router’s factory defaults.

Method one: With the modem router powered on, use a pin to press and hold

the RESET button on the rear panel of the modem router for 8 seconds until

all LEDs turn off momentarily, then release the button.

Method two: Log into the web management page of the modem router, and

go to

Advanced

>

System Tools

>

Backup & Restore

,

click

Factory

Restore

and

wait until the reset process is complete.

LAN1, LAN2, LAN3,

LAN4/WAN

For connecting the modem router to your PC or other Ethernet network

devices. In wireless router mode you will be able to connect to Cable/FTTH/

VDSL/ADSL devices.

POWER ON/OFF

The switch for the power. Press it to power on or off the modem router.

POWER

For connecting the modem router to power socket via the provided power

adapter.

Chapter

2

Connect the Hardware

This chapter contains the following sections:

•

Position Your Modem Router

•

Connect Your Modem Router

9

Chapter 2

Connect the Hardware

2° 1°

Position Your Modem Router

With the modem router, you can access your network from anywhere within the

wireless network coverage. However, the wireless signal strength and coverage varies

depending on the actual environment where your modem router is in. Many obstacles

may limit the range of the wireless signal, for example, concrete structures, thickness

and number of walls.

For your security and best Wi-Fi performance, please:

• Do Not locate the modem router in the place where it will be exposed to moisture or

excessive heat.

• Keep away from the strong electromagnetic radiation and the device of

electromagnetic sensitive.

• Place the modem router in a location where it can be connected to the various devices

as well as to a power source.

• Make sure the cables and power cord are safely placed out of the way so they do not

create a tripping hazard.

Tips:

The modem router can be placed on a shelf or desktop.

Generally, the modem router is placed on a horizontal surface. The device can also be

mounted on the wall as shown in the following picture.

Note:

The diameter of the screw is between 4.1mm and 9.6mm,

and the distance of two screws is 150mm. The screws that

project from the wall need around 7mm based, and the length of the screw needs to be at least 25mm to withstand

the weight of the product.

2° 2°

Connect Your Modem Router

Follow the steps below to connect your modem router.

10

Chapter 2

Connect the Hardware

1°

Connect the ADSL line and power adapter. The electrical outlet shall be installed

near the device and shall be easily accessible

ADSL Splitter

Phone Jack

Connect to the phone (Optional)

2

Connect the modem router to the

ADSL splitter.

Power Adapter

1

Connect the ADSL splitter

to the phone jack

Modem Router

3

Turn on the modem router.

2°

Connect your computer to the modem router.

Method 1: Wired

Connect your computer’s Ethernet port to the LAN port on the modem router via the

Ethernet cable.

Method 2: Wirelessly

Use the default SSID (Wireless Network Name) and Wireless Password printed on the

product label of the modem router to connect wirelessly.

Method 3: Use the WPS button

Wireless devices that support WPS, including Android phones, tablets, most USB

network cards, can be connected to your router through this method. (WPS is not

supported by IOS devices.)

Note:

The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will

be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured

with the appropriate encryption before configuring the WPS.

1 )

Tab the WPS icon on the device’s screen.

11

Chapter 2

Connect the Hardware

2 )

Immediately press the WPS button on your modem router.

3 )

The WPS LED flashes for about 3 minutes during the WPS process.

4 )

When the WPS LED is on, the client device has successfully connected to the

modem router.