Page 36 / 119
Scroll up to view Page 31 - 35
32
Chapter 8
USB Settings
8° 1°
Local Storage Sharing
Share your USB storage devices with different users on the network.
8° 1° 1°
Access the USB disk
1°
Connect Your USB Disk
Insert your USB storage device into the modem router’s USB port directly or using
a USB cable. Wait several seconds until the USB LED becomes solid on.
Tips:
•
If you use USB hubs, make sure no more than 4 devices are connected to the modem router.
•
If the USB storage device requires using bundled external power, make sure the external power has been
connected.
•
If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
•
Before you physically disconnect a USB device from the modem router, safely remove it to avoid data
damage: Go to
Advanced
>
USB Settings
>
Device Settings
and click
.
2°
Access Your USB Disk
By default all the network clients can access all folders on your USB disk. Refer to
the following table for access instructions. You can also customize your sharing
content and set a sharing account by referring to
Customize Your Settings
.
Page 37 / 119
33
Chapter 8
USB Settings
Windows
computer
¾
Method 1:
Go to
Computer
>
Network
, then click the Network Server Name (
ARCHER _D2
by
default) in the
Computer
section.
Note:
Here takes Windows 7 as an example.
¾
Method 2:
1°
Press
Start
(
)+
R
on the keyboard (or select
Start
>
Run
)
2°
Type the server address
\\tplinkmodem.net
or
ftp://tplinkmodem.net
in the
dialog box
3°
Click
OK
s
Page 38 / 119
34
Chapter 8
USB Settings
Mac
1°
Select
Go
>
Connect to Server
2°
Type the server address
smb://tplinkmodem.net
or
ftp:/
/
tplinkmodem.net
3°
When prompted, select the
Guest
radio box
4°
Click
Connect
Note:
If you have set up a username and a password to deny anonymous access to the USB disks,
you should select the
Registered User
radio box. To learn how to set up an account for the
access, refer to
To Set up Authentication for Data Security
.
pad
Use a third-party app for network files management.
Tips:
You can also access your USB disk by using your Network/Media Server Name as the server address. Refer to
To
Customize the Address of the USB Disk
to learn more.
8° 1° 2°
Customize Your Settings
¾
To Only Share Specific Content
By default,
Share All
is enabled so all content on the USB disk is shared. If you want to
only share specific folders, follow the steps below:
1°
Visit
http://tplinkmodem.net
, then log in with the password you set for the modem
router.
2°
Select
Basic
>
USB Settings
>
Sharing Access
. Focus on the
Folder Sharing
section.
Click the button to disable
Share All
, then click
Add
to add a new sharing folder.
Page 39 / 119
35
Chapter 8
USB Settings
3°
Select the
Volume Name
and
Folder Path
, then enter a
Folder Name
as you like.
4°
Decide the way you share the folder:
•
Enable Authentication:
Tick to enable authentication for this folder sharing,
and you will be required to use a username and password to access the USB
disk. Refer to
To Set up Authentication for Data Security
to learn more.
•
Enable Write Access:
If you tick this check box, network clients can modify this
folder.
•
Enable Media Sharing:
Tick to enable media sharing for this folder, and you can
view photos, play music and watch movies stored on the USB disk directly from
DLNA-supported devices. Click
Media Sharing
to learn more.
5°
Click
OK
.
Tips:
The modem router can share eight volumes at most. You can click
on the page to detach the corresponding
volume you do not need to share.
Page 40 / 119
36
Chapter 8
USB Settings
¾
To Set up Authentication for Data Security
If you enable
Authentication
, network clients will be required to enter the username
and password you set when accessing the USB disk.
1°
Visit
http://tplinkmodem.net
, then log in with the password you set for the modem
router.
2°
Select
Advanced
>
USB Settings
>
Sharing Access
.
3°
Choose to use the default Account (admin) or use a new account and click
Save
.
4°
Enable
Authentication
to apply the account you just set.
•
If you leave
Share All
enabled, click the button to enable
Authentication
for all
folders.
•
If
Share All
is disabled, enable
Authentication
for specific folders.
19216811.live