Archer C5

AC1200 Wireless Dual Band Gigabit Router

- 30 -



Connect Manually -

You can configure the router to make it connect or disconnect manually.

After a specified period of inactivity (

Max Idle Time

), the router will disconnect from your

Internet connection, and you will not be able to re-establish your connection automatically as

soon as you attempt to access the Internet again. To use this option, check the radio button. If

you want your Internet connection to remain active at all times, enter "0" in the

Max Idle Time

field. Otherwise, enter the number of minutes that you wish to have the Internet connecting

last unless a new link is requested.

Caution

: Sometimes the connection cannot be disconnected although you specify a time to

Max

Idle Time

, because some applications are visiting the Internet continually in the background.

Click the

Save

button to save your settings.

6.

If your ISP provides PPTP connection, please select

PPTP/Russia PPTP

option. And you

should enter the following parameters (Figure 4-9):

Figure 4-9 PPTP Settings



User Name/Password -

Enter the User Name and Password provided by your ISP. These

fields are case-sensitive.



Dynamic IP/ Static IP -

Choose either as you are given by your ISP and enter the ISP’s IP

address or the domain name.

Archer C5

AC1200 Wireless Dual Band Gigabit Router

- 31 -

If you choose static IP and enter the domain name, you should also enter the DNS assigned

by your ISP. And click the

Save

button.

Click the

Connect

button to connect immediately. Click the

Disconnect

button to disconnect

immediately.



Connect on Demand -

You can configure the router to disconnect from your Internet

connection after a specified period of inactivity (

Max Idle Time

). If your Internet connection

has been terminated due to inactivity,

Connect on Demand

enables the router to

automatically re-establish your connection as soon as you attempt to access the Internet

again. If you wish to activate

Connect on Demand

, check the radio button. If you want your

Internet connection to remain active at all times, enter “0” in the

Max Idle Time

field.

Otherwise, enter the number of minutes you want to have elapsed before your Internet

connection terminates.



Connect Automatically -

Connect automatically after the router is disconnected. To use this

option, check the radio button.



Connect Manually -

You can configure the router to make it connect or disconnect manually.

After a specified period of inactivity (

Max Idle Time

), the router will disconnect from your

Internet connection, and you will not be able to re-establish your connection automatically as

soon as you attempt to access the Internet again. To use this option, click the radio button. If

you want your Internet connection to remain active at all times, enter "0" in the

Max Idle Time

field. Otherwise, enter the number in minutes that you wish to have the Internet connecting

last unless a new link is requested.

Caution

: Sometimes the connection cannot be disconnected although you specify a time to

Max

Idle Time

because some applications are visiting the Internet continually in the background.

Click the

Save

button to save your settings.



Note:

If you don't know how to choose the appropriate connection type, click the

Detect

button to allow

the router to automatically search your Internet connection for servers and protocols. The

connection type will be reported when an active Internet service is successfully detected by the

router. This report is for your reference only. To make sure the connection type your ISP provides,

please refer to the ISP. The various types of Internet connections that the router can detect are as

follows:



PPPoE

-

Connections which use PPPoE that requires a user name and password.



Dynamic IP

-

Connections which use dynamic IP address assignment.



Static IP

-

Connections which use static IP address assignment.

Archer C5

AC1200 Wireless Dual Band Gigabit Router

- 32 -

The router cannot detect PPTP/L2TP/Big Pond connections with your ISP. If your ISP uses one

of these protocols, then you must configure your connection manually.

4.4.2

LAN

Choose menu “

Network

→

LAN

”, you can configure the IP parameters of the LAN on the screen

as below.

Figure 4-10 LAN



MAC Address

-

The physical address of the router, as seen from the LAN. The value can't

be changed.



IP Address -

Enter the IP address of your router or reset it in dotted-decimal notation

(factory default: 192.168.0.1).



Subnet Mask -

An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.



Note:

1)

If you change the IP Address of LAN, you must use the new IP Address to log in the router.

2)

If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP

server will change accordingly at the same time

，

while the Virtual Server and DMZ Host will

not take effect until they are re-configured.

4.4.3

MAC Clone

Choose menu “

Network

→

MAC Clone

”, you can configure the MAC address of the WAN on

the screen below, Figure 4-11:

Figure 4-11 MAC Address Clone

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely

needed here.

Archer C5

AC1200 Wireless Dual Band Gigabit Router

- 33 -



WAN MAC Address -

This field displays the current MAC address of the Internet port. If

your ISP requires you to register the MAC address, please enter the correct MAC address

into this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit).



Your PC's MAC Address -

This field displays the MAC address of the PC that is managing

the router. If the MAC address is required, you can click the

Clone MAC Address

button

and this MAC address will fill in the

WAN MAC Address

field.

Click

Restore Factory MAC

to restore the MAC address of Internet port to the factory default

value. Click the

Save

button to save your settings.



Note:

Only the PC on your LAN can use the

MAC Address Clone

function.

4.4.4

IPTV

Choose menu “

Network

→

IPTV

”, you can configure the IPTV function on the screen below,

Figure 4-12Figure 4-11:

Figure 4-12 IPTV



IGMP Proxy

- If you want to watch TV through IGMP, please

Enable

it.



MODE



Automatic

- There would be no change to the LAN ports, work with IGMP Proxy

technology, allowing watch IPTV via wired and wireless connection.



Bridge

- Assign an individual LAN port for IPTV set-top-box, which can get IP address

from ISP directly, without any quality loss even when PCs connect with router are

downloading torrents at maximum speed, since this LAN port is isolated from other NAT

LAN ports.



802.1Q Tag VLAN

- ISP would provide the networking service based on 802.1Q Tag

VLAN technology. You can assign different VLAN Tag ID for different LAN ports, to

connect PC, IPTV set-top-box or IP-phone. Please contact with you ISP to get the VLAN

ID information.

Archer C5

AC1200 Wireless Dual Band Gigabit Router

- 34 -

4.5

Dual Band Selection

Choose menu “

Dual Band Selection

”, and you can choose the working frequency for your router.

It is recommended that your computers and devices running video and voice applications use the

5GHz band, while your guest access and computers that are only browsing the web use the

2.4GHz band.

Figure 4-13 Dual Band Selection



Concurrently with 2.4GHz and 5GHz (802.11a/b/g/n/ac)

-

Choose this option, and then

the router will work concurrently in 2.4GHz and 5GHz frequency.



Only work in 2.4GHz (802.11b/g/n) -

Choose this option, and then the router will only work

in 2.4GHz frequency. You can use the 2.4GHz band to connect to many classic wireless

devices like gaming consoles, laptops, DVRs, ect.



Only work in 5GHz (802.11a/n/ac) -

Choose this option, and then the router will only work in

5GHz frequency. This band is less crowded and is used for time-sensitive music, video

streaming or gaming. Using this band can avoid interference with 2.4GHz networks or noisy

devices like cordless phones and microwave ovens.

4.6

Wireless 2.4GHz

Figure 4-14 Wireless menu

There are six submenus under the Wireless menu (shown in Figure 4-14):

Wireless Settings

,

WPS

,

Wireless Security

,

Wireless MAC Filtering

,

Wireless Advanced

and

Wireless

Statistics

. Click any of them, and you will be able to configure the corresponding functions.