Page 46 / 141 Scroll up to view Page 41 - 45
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 35 -
4.6.1
Wireless Settings
Choose menu “
Wireless 2.4GHz
Wireless Settings
”, you can configure the basic settings for
the wireless network of 2.4GHz on this page.
Figure 4-15 Wireless Settings – 2.4GHz
Wireless Network Name -
Enter a value of up to 32 characters. The same Name (SSID)
must be assigned to all wireless devices in your network.
Region
-
Select your region from the drop-down list. This field specifies the region where the
wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the
Save
button
,
then the
Note Dialog appears. Click
OK
.
Note Dialog
Note:
Limited by local law regulations, version for North America does not have region selection
option.
Mode -
This field determines the wireless mode which the router works on.
11bg mixed -
Select if you are using both 802.11b and 802.11g wireless clients.
11bgn mixed -
Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It
is strongly recommended that you set the Mode to
802.11bgn mixed
, and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the router.
Page 47 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 36 -
Channel Width -
Select the channel width from the drop-down list
.
The default setting is
automatic, which can adjust the channel width for your clients automatically.
Note:
If
11bg mixed
is selected in the
Mode
field, the
Channel Width
selecting field will turn grey
and the value will become 20M, which is unable to be changed.
Channel -
This field determines which operating frequency will be used. The default channel
is set to
Auto
, so the AP will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Enable SSID Broadcast -
When wireless clients survey the local area for wireless networks
to associate with, they will detect the SSID broadcast by the router. If you select the
Enable
SSID Broadcast
checkbox, the Wireless router will broadcast its name (SSID) on the air.
Enable WDS Bridging -
Check this box to enable WDS. With this function, the router can
bridge two or more WLANs. If this checkbox is selected, you will have to set the following
parameters as shown in Figure 4-16. Make sure the following settings are correct.
Figure 4-16 WDS Setting
SSID (to be bridged)
- The SSID of the AP your router is going to connect to as a client.
You can also use the search function to select the SSID to join.
MAC Address (to be bridged)
- The BSSID of the AP your router is going to connect to
as a client. You can also use the search function to select the BSSID to join.
Survey
- Click this button, you can search the AP which runs in the current channel.
Key type
- This option should be chosen according to the AP's security configuration. It
is recommended that the security type is the same as your AP's security type
WEP Index
- This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).
It indicates the index of the WEP key.
Auth Type
- This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).
It indicates the authorization type of the Root AP.
Page 48 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 37 -
Password
- If the AP your router is going to connect needs password, you need to fill
the password in this blank.
4.6.2
WPS
Choose menu “
Wireless 2.4GHz
WPS
”, you can the screen as shown in Figure 4-17. This
section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi
Protected Setup) function.
Figure 4-17 WPS
WPS Status -
Enable or disable the WPS function here.
Current PIN -
The current value of the router's PIN is displayed here. The default PIN of the
router can be found in the label or User Guide.
Restore PIN -
Restore the PIN of the router to its default.
Gen New PIN -
Click this button, and then you can get a new random value for the router's
PIN. You can ensure the network security by generating a new PIN.
Disable router’s PIN -
If this box is checked, and then wireless clients will not be able to
connect to the wireless network with PIN code.
Add device -
You can add a new device to the existing network manually by clicking this
button.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I.
Use the Wi-Fi Protected Setup Button
Use this method if your client device has a WPS button.
Page 49 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 38 -
Step 1:
Press the
WPS/Reset
button on the back panel of the router, as shown in Figure 4-18.
You can also keep the default WPS status as
Enabled
and click the
Add device
button
in Figure 4-17. Then choose “
Press the button of the new device in two minutes
” and
click
Connect
, shown in Figure 4-19.
Figure 4-18
Figure 4-19 Add A New Device
Step 2:
Press and hold the
WPS
button of the client device.
Step 3:
The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
process.
Step 4:
When the WPS LED is on, the client device has successfully connected to the router.
II.
Enter the client device’s PIN on the router
Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected
Setup PIN number.
Step 1:
Keep the default WPS status as
Enabled
and click the
Add device
button in Figure
4-17, then Figure 4-20 will appear.
Figure 4-20 Add A New Device
Step 2:
Enter the PIN number from the client device in the field on the WPS screen above. Then
click
Connect
button.
Page 50 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 39 -
Step 3:
Connect successfully
” will appear on the screen of Figure 4-20, which means the
client device has successfully connected to the router.
III. Enter the router’s PIN on your client device
Use this method if your client device asks for the router’s PIN number.
Step 1:
On the client device, enter the PIN number listed on the router’s Wi-Fi Protected Setup
screen, shown in Figure 4-17 (It is also labeled on the bottom of the router).
Step 2:
The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected
Setup process.
Step 3:
When the WPS LED is on, the client device has successfully connected to the router.
Note:
1)
The WPS LED on the router will light green for five minutes if the device has been
successfully added to the network.
2)
The WPS function cannot be configured if the Wireless Function of the router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
4.6.3
Wireless Security
Choose menu “
Wireless 2.4GHz
Wireless Security
”, you can configure the security settings
of your wireless network. There are five wireless security modes supported by the router:
WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, and WEP.
Figure 4-21 Wireless Security

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top